Emergency Stop Switches / E-Stop Switches 16MM IND CTRL E-STOP OPERATOR
Note di Ricerca
1. What this is
A01ESSP8 is an APEM A01/A02 pushbutton/indicator.
2. Part-number decode
- Series: APEM A01/A02
- Type: pushbutton
- Ingress rating: IP65
3. Compatibility & ordering
APEM makes pushbuttons (incl. anti-vandal and illuminated), tactile switches, toggle switches, joysticks, and indicators for industrial and electronic equipment. Match by type, actuation, illumination, sealing (IP rating), and mounting, then use the APEM datasheet to confirm the exact contact and actuator configuration encoded in the part number.
4. Data-quality note
The APEM series and switch type are decoded from the part number (grounded in the apem.com catalog and distributor listings). The exact contact arrangement, illumination, and actuator/cap are encoded in the full order code — confirm against the APEM datasheet for a precise order (not guessed here).
5. Sources
- APEM product catalog (apem.com)
- Distributor listing (RS / Mouser / DigiKey) — search the exact part number
Fonte
- APEM — A01ESSP8 — apem.com
Specifiche
|
Device class
|
pushbutton
|
|
Enriched by
|
apem-decoder-2026-08-12
|
|
Ingress rating
|
IP65
|
|
Lead time
|
140 Days
|
|
Manufacturer series
|
A01/A02
|
|
Mouser part number
|
642-A01ESSP8
|
|
Pn status
|
decoded
|
|
Rohs status
|
RoHS Compliant
|
|
Series description
|
APEM A01/A02-series pushbutton switch & indicator — panel-mount, sealed to IP65, single- to four-pole (a broad general-purpose command-switch range)
|
Guida Rapida all'Installazione
Panel cutout: 22mm. Mount with the yellow backing plate visible (required by EN/ISO 13850).
Wiring: Wire NC contacts in series with the safety relay input channels. Use dual-channel wiring for SIL 3 / PLe applications. Never wire directly to a motor contactor.
Testing: Press the e-stop and verify the machine stops within the required time. Test the reset mechanism. Repeat monthly per EN/ISO 13850.
Dimensioni
Risoluzione dei Problemi
E-stop won't reset (twist/pull doesn't release)
Check for debris in the mechanism. For twist-release: turn clockwise 45-90 degrees. For push-pull: pull straight out firmly. If the mechanism is stuck, the internal latch may be damaged — replace the entire head assembly.
Machine doesn't stop when e-stop is pressed
Critical safety issue. Immediately lock out the machine. Check wiring — NC contacts must be in series with the safety relay. Verify the safety relay is functioning. A broken wire in an NC circuit should cause a stop, so check for a wiring bypass.
Safety relay faults after e-stop reset
The safety relay detects a cross-fault between the two monitoring channels. Check that both NC contacts on the e-stop are switching simultaneously. One contact may be welded closed — replace the contact block.
Dove Acquistare
Specifiche Rapide
- Device class
- pushbutton
- Enriched by
- apem-decoder-2026-08-12
- Ingress rating
- IP65
- Lead time
- 140 Days
- Manufacturer series
- A01/A02