SCHNEIDER

Aktif

Schneider Electric XESD1281 Pendant Station Contact

Square D SCHNEIDER — Schneider Electric XESD1281 Pendant Station Contact

Schneider Electric XESD1281 Pendant Station Contact The Schneider Electric XESD1281 is a pendant station contact with a current rating of 10 Amps and a voltage rating of 600VAC. It has a contact configuration of 1C/O, 1NO. The XESD1281 has a spring return actuator type.

Catatan Penelitian

1. What this is

SCHNEIDER is a Square D Square D device — line not recognized.

2. Part-number decode

  • Series: Square D Square D (line not recognized)
  • Type: command switch

3. Compatibility & ordering

Square D (Schneider's US brand) makes the Class 9001 30mm heavy-duty command switches and Harmony devices. Match by type, actuation, illumination, sealing, and mounting, then use the manufacturer datasheet to confirm the exact contact and termination encoded in the part number.

4. Data-quality note

The exact Square D product line/configuration could not be confidently decoded from this part number. Kept and documented; flagged needs-verification.

5. Sources

  • Square D product catalog (se.com)
  • Distributor listing (DigiKey / Mouser) — search the exact part number

Verified distributor data (Mouser)

  • Availability: Check Mouser for availability

This part is carried by Mouser Electronics; the description and datasheet above come straight from the distributor's catalog, confirming and expanding the part-number decode above.


Sumber
  1. Square D — SCHNEIDER — se.com

Spesifikasi

Enriched by
squared-decoder-2026-08-12
Manufacturer series
Square D (line not recognized)
Mouser checked
2026-09-28
Mouser matched
true
Pn status
verified
Product type
Pendant Station Contact
Series description
Square D control device — exact series/config could not be decoded from this part number; kept and flagged for verification
Shopify id
8346372669753
Vendor
Square D

Referensi Cepat Instalasi

Panel cutout: 22mm. Insert from the front of the panel, secure with mounting nut from behind (tighten to 2-3 Nm).

Contact block: Snap or screw the contact block onto the rear of the button body. Ensure the contact block orientation matches the wiring diagram — NO terminals are usually marked.

Wiring: Use 0.5-2.5mm² stranded wire with ferrules. Tighten screw terminals to 0.8 Nm. Test the button function before energizing the circuit.

Dimensi

Pemecahan Masalah

Button doesn't respond when pressed

Check the contact block first — it's the most common failure point. Test continuity across the NO or NC terminals with a multimeter. If no click is felt, the return spring in the head may be broken.

Works intermittently

Contact block contacts are pitted or burned. Replace the contact block — don't try to file the contacts. Check if the rated cycle count has been exceeded.

Button feels mushy or doesn't click

The spring return mechanism in the button head is worn. Replace the head. The contact block can usually be reused if it tests OK.

Foto & Gambar

Gambar: cdn.shopify.com

Tempat Membeli

Kisaran harga

$24.65 — $24.65

from 1 seller in US dollars

Spesifikasi Cepat

Enriched by
squared-decoder-2026-08-12
Manufacturer series
Square D (line not recognized)
Mouser checked
2026-09-28
Mouser matched
true
Pn status
verified