Schneider Electric XESD1281 Pendant Station Contact The Schneider Electric XESD1281 is a pendant station contact with a current rating of 10 Amps and a voltage rating of 600VAC. It has a contact configuration of 1C/O, 1NO. The XESD1281 has a spring return actuator type.
अनुसंधान नोट्स
1. What this is
SCHNEIDER is a Square D Square D device — line not recognized.
2. Part-number decode
- Series: Square D Square D (line not recognized)
- Type: command switch
3. Compatibility & ordering
Square D (Schneider's US brand) makes the Class 9001 30mm heavy-duty command switches and Harmony devices. Match by type, actuation, illumination, sealing, and mounting, then use the manufacturer datasheet to confirm the exact contact and termination encoded in the part number.
4. Data-quality note
The exact Square D product line/configuration could not be confidently decoded from this part number. Kept and documented; flagged needs-verification.
5. Sources
- Square D product catalog (se.com)
- Distributor listing (DigiKey / Mouser) — search the exact part number
Verified distributor data (Mouser)
- Availability: Check Mouser for availability
This part is carried by Mouser Electronics; the description and datasheet above come straight from the distributor's catalog, confirming and expanding the part-number decode above.
स्रोत
- Square D — SCHNEIDER — se.com
स्पेसिफिकेशन
|
Enriched by
|
squared-decoder-2026-08-12
|
|
Manufacturer series
|
Square D (line not recognized)
|
|
Mouser checked
|
2026-09-28
|
|
Mouser matched
|
true
|
|
Pn status
|
verified
|
|
Product type
|
Pendant Station Contact
|
|
Series description
|
Square D control device — exact series/config could not be decoded from this part number; kept and flagged for verification
|
|
Shopify id
|
8346372669753
|
|
Vendor
|
Square D
|
इंस्टॉलेशन त्वरित संदर्भ
Panel cutout: 22mm. Insert from the front of the panel, secure with mounting nut from behind (tighten to 2-3 Nm).
Contact block: Snap or screw the contact block onto the rear of the button body. Ensure the contact block orientation matches the wiring diagram — NO terminals are usually marked.
Wiring: Use 0.5-2.5mm² stranded wire with ferrules. Tighten screw terminals to 0.8 Nm. Test the button function before energizing the circuit.
आयाम
समस्या निवारण
Button doesn't respond when pressed
Check the contact block first — it's the most common failure point. Test continuity across the NO or NC terminals with a multimeter. If no click is felt, the return spring in the head may be broken.
Works intermittently
Contact block contacts are pitted or burned. Replace the contact block — don't try to file the contacts. Check if the rated cycle count has been exceeded.
Button feels mushy or doesn't click
The spring return mechanism in the button head is worn. Replace the head. The contact block can usually be reused if it tests OK.
कहाँ से खरीदें
मूल्य सीमा
$24.65 — $24.65
from 1 seller in US dollars
संक्षिप्त स्पेसिफिकेशन
- Enriched by
- squared-decoder-2026-08-12
- Manufacturer series
- Square D (line not recognized)
- Mouser checked
- 2026-09-28
- Mouser matched
- true
- Pn status
- verified