M22-WR
AktifM22 2-Position Selector Switch Maintained
2-position maintained selector switch for Eaton M22 series. 22.5mm cutout, IP67 front. Standard knob handle.
Aplikasi Umum
Two-position maintained selector switch from the Eaton M22 series. Used for hand/auto mode selection on pump stations, local/remote switching on motor control centers, and on/off functions where a toggle-style action is preferred over a push button. The maintained action stays in the selected position, giving the operator a visual reference of the current mode. IP67 front face handles washdown and dusty environments. The selector pairs with M22-series contact blocks — typically one 1NO block per position wired to PLC discrete inputs for mode selection logic.
Sering Ditemukan Pada
Spesifikasi
|
Certifications
Third-party safety certifications. UL = required for US NEC installations. CE = EU compliance. CSA = Canadian standards.
|
UL, CSA, CE
|
|
Contact Configuration
Normally Open — circuit is off until you press. Standard for start/go/enable functions.
|
1NO
|
|
Cutout Diameter
The hole size you drill in your panel to mount this button. 22mm is the most common industrial standard worldwide.
|
22.5mm
|
|
IP Rating
IP67: Dust-tight and survives temporary water submersion (1m for 30 min). Handles oil splashes, steam cleaning, and rain.
|
IP67 (front)
|
|
Material
The bezel/body material. Metal bezels are more durable in harsh environments. Plastic is lighter and cheaper.
|
Plastic/Metal bezel
|
|
Mounting Type
How the button attaches to the panel. Panel mount is standard — installs through a cutout from the front.
|
Panel
|
|
Positions
|
2
|
|
Return type
|
Maintained
|
Spesifikasi dengan ikon ini terhubung ke halaman sumber asli pabrikan
Anda Juga Membutuhkan
Ini adalah komponen modular. Untuk perakitan lengkap, Anda mungkin juga membutuhkan:
Alternatif yang Kompatibel
Produk-produk ini merupakan referensi silang yang setara secara fungsional dari produsen lain.
Referensi Cepat Instalasi
Panel cutout: 22.5mm. Align the selector positions with the desired panel markings before tightening.
Contact blocks: Attach one contact block per position. Wire each to a separate PLC input for position feedback. A 2-position switch needs 1-2 blocks; 3-position needs 2-3.
Dimensi
Diagram Pengkabelan
Pemecahan Masalah
Not responding to input
Check wiring continuity with a multimeter. Verify the contact block is properly seated. Inspect terminals for loose connections.
Tempat Membeli
Kisaran harga
$3.6 — $20.15
di 4 distributor
Spesifikasi Cepat
- Certifications
- UL, CSA, CE
- Contact Configuration
- 1NO
- Cutout Diameter
- 22.5mm
- IP Rating
- IP67 (front)
- Material
- Plastic/Metal bezel
Apa Kata Mereka
“Good selector for mode control applications. Make sure you get the right number of positions and maintained vs spring-return for your application.”
Pelajari Lebih Lanjut
Sumber Data
Spesifikasi dan data produk bersumber dari referensi berikut.
Eaton M22-WR Product Page
https://www.eaton.com/us/en-us/skuPage.M22-WR.html
Diakses March 29, 2026