M22-WR
सक्रियM22 2-Position Selector Switch Maintained
2-position maintained selector switch for Eaton M22 series. 22.5mm cutout, IP67 front. Standard knob handle.
सामान्य अनुप्रयोग
Two-position maintained selector switch from the Eaton M22 series. Used for hand/auto mode selection on pump stations, local/remote switching on motor control centers, and on/off functions where a toggle-style action is preferred over a push button. The maintained action stays in the selected position, giving the operator a visual reference of the current mode. IP67 front face handles washdown and dusty environments. The selector pairs with M22-series contact blocks — typically one 1NO block per position wired to PLC discrete inputs for mode selection logic.
आमतौर पर पाया जाता है
स्पेसिफिकेशन
|
Certifications
Third-party safety certifications. UL = required for US NEC installations. CE = EU compliance. CSA = Canadian standards.
|
UL, CSA, CE
|
|
Contact Configuration
Normally Open — circuit is off until you press. Standard for start/go/enable functions.
|
1NO
|
|
Cutout Diameter
The hole size you drill in your panel to mount this button. 22mm is the most common industrial standard worldwide.
|
22.5mm
|
|
IP Rating
IP67: Dust-tight and survives temporary water submersion (1m for 30 min). Handles oil splashes, steam cleaning, and rain.
|
IP67 (front)
|
|
Material
The bezel/body material. Metal bezels are more durable in harsh environments. Plastic is lighter and cheaper.
|
Plastic/Metal bezel
|
|
Mounting Type
How the button attaches to the panel. Panel mount is standard — installs through a cutout from the front.
|
Panel
|
|
Positions
|
2
|
|
Return type
|
Maintained
|
इस आइकन वाले स्पेसिफिकेशन निर्माता के मूल स्रोत पृष्ठ से जुड़े हैं
आपको यह भी चाहिए
यह एक मॉड्यूलर घटक है। पूर्ण असेंबली के लिए, आपको ये भी चाहिए:
संगत विकल्प
ये उत्पाद अन्य निर्माताओं से कार्यात्मक रूप से समकक्ष क्रॉस-रेफ़रेंस हैं।
इंस्टॉलेशन त्वरित संदर्भ
Panel cutout: 22.5mm. Align the selector positions with the desired panel markings before tightening.
Contact blocks: Attach one contact block per position. Wire each to a separate PLC input for position feedback. A 2-position switch needs 1-2 blocks; 3-position needs 2-3.
आयाम
वायरिंग डायग्राम
समस्या निवारण
Not responding to input
Check wiring continuity with a multimeter. Verify the contact block is properly seated. Inspect terminals for loose connections.
कहाँ से खरीदें
मूल्य सीमा
$3.6 — $20.15
4 वितरकों से
संक्षिप्त स्पेसिफिकेशन
- Certifications
- UL, CSA, CE
- Contact Configuration
- 1NO
- Cutout Diameter
- 22.5mm
- IP Rating
- IP67 (front)
- Material
- Plastic/Metal bezel
उपयोगकर्ता क्या कह रहे हैं
“Good selector for mode control applications. Make sure you get the right number of positions and maintained vs spring-return for your application.”
और जानें
डेटा स्रोत
स्पेसिफिकेशन और उत्पाद डेटा निम्नलिखित संदर्भों से प्राप्त।
Eaton M22-WR Product Page
https://www.eaton.com/us/en-us/skuPage.M22-WR.html
एक्सेस किया गया March 29, 2026