Siemens · SIRIUS ACT सीरीज़

3SU1400-1AA10-1BA0

सक्रिय
UL CSA CE

SIRIUS ACT 1NO Contact Block

पार्ट नंबर: 3SU1 - 10 - 1BA0
Siemens SIRIUS ACT सीरीज़ Introduced circa 2013

Siemens SIRIUS ACT 1NO contact block — snap-on for all 3SU1 operators.

सामान्य अनुप्रयोग

Native Siemens contact block for the SIRIUS ACT range. Snap-on mounting compatible with all 3SU1 metal and plastic front ring operators. TIA Portal configurable when used with AS-Interface module. Silver alloy contacts rated for 6A/240V.

स्पेसिफिकेशन

Certifications
UL, CSA, CE
Contact Configuration
1NO
Mechanical Life
10,000,000 cycles
Terminal Type
Screw clamp

इंस्टॉलेशन त्वरित संदर्भ

Mounting: Snap onto the rear of any compatible button body in the same series. The latch clicks audibly when properly seated. Some models require a mounting adapter.

Wiring: Terminals are marked NO (11/12) or NC (21/22). Use 0.5-2.5mm² wire with ferrules. Tighten to 0.8 Nm. Verify with a multimeter before energizing.

आयाम

वायरिंग डायग्राम

L T 11 12 NO (open) press ↓

समस्या निवारण

Intermittent switching

Silver contacts are pitted from arcing. Replace the contact block — they are consumable parts. If arcing is severe, check that the switched load doesn't exceed the contact rating (typically 6A at 120VAC).

Contact block won't snap onto button body

Verify the contact block series matches the button head series (e.g., Schneider ZB4 blocks fit ZB4 heads only, not ZB5). Check for debris or damage on the mounting tabs.

कहाँ से खरीदें

मूल्य सीमा

$18.22 — $77.27

3 वितरकों से

संक्षिप्त स्पेसिफिकेशन

Certifications
UL, CSA, CE
Contact Configuration
1NO
Mechanical Life
10,000,000 cycles
Terminal Type
Screw clamp

उपयोगकर्ता क्या कह रहे हैं

+

“Native Siemens contact block for the SIRIUS ACT range. Snap-on mounting compatible with all 3SU1 metal and plastic front ring operators. TIA Portal configurable when used with AS-Interface module. Sil”

Reddit r/PLC 17 अपवोट थ्रेड देखें →