OBSF-30-DK
सक्रियOBSF-30 Dark Khaki 30mm Snap-in
Sanwa OBSF-30 dark khaki — military-inspired color.
सामान्य अनुप्रयोग
Unique earth-tone for themed builds. Same Sanwa internals.
स्पेसिफिकेशन
|
Actuation Force
The force needed to press the button. Lower = more sensitive. Sanwa ~65g (light), Seimitsu ~85g (medium), Happ ~130g (heavy).
|
65g
|
|
Color
Button/actuator color. Green = start/go, Red = stop/emergency, Yellow = caution, Blue = reset (per IEC 60204-1).
|
Dark Khaki
|
|
Diameter
|
30mm
|
|
Microswitch Type
The internal switch mechanism. Built-in = sealed unit. Cherry D44X = replaceable, clicky. Omron = quieter, longer life.
|
Built-in
|
|
Mounting Type
How the button attaches to the panel. Panel mount is standard — installs through a cutout from the front.
|
Snap-in
|
इंस्टॉलेशन त्वरित संदर्भ
Mounting: Snap-in buttons push into a 30mm hole from the top of the panel. Screw-in buttons thread from below and secure with a nut. Use 2-3mm acrylic, wood, or metal panel.
Wiring: Connect the microswitch terminals to your encoder or PCB. Common ground shared across all buttons. Quick-disconnect (0.110") terminals are standard on Japanese buttons.
आयाम
समस्या निवारण
Not responding to input
Check wiring continuity with a multimeter. Verify the contact block is properly seated. Inspect terminals for loose connections.
कहाँ से खरीदें
मूल्य सीमा
$11.75 — $59.62
2 वितरकों से
संक्षिप्त स्पेसिफिकेशन
- Actuation Force
- 65g
- Color
- Dark Khaki
- Diameter
- 30mm
- Microswitch Type
- Built-in
- Mounting Type
- Snap-in
उपयोगकर्ता क्या कह रहे हैं
“Unique earth-tone for themed builds. Same Sanwa internals.”
