8LM2TB840
सक्रियLovato 8LM2TB840 Red Mushroom E-Stop Actuator (8LM Platinum, twist-release, head-only)
Lovato 8LM emergency stop.
सामान्य अनुप्रयोग
Italian e-stop. Competitive alternative to Schneider/ABB for European machine builders watching costs.
अनुसंधान नोट्स
1. Overview
The Lovato Electric 8LM2TB840 is a 22 mm red mushroom-head emergency-stop actuator from Lovato's 8LM "Platinum" metal control-device series — a Ø40 red mushroom, push-to-latch / twist-to-release. Like the other 8LM2TB operators (#477/#478) it is an actuator (head): in the 8LM modular system it takes a separate NC contact element (8LM2TC0.) on a holder to form a working E-STOP. (Data-quality note: this was cataloged with a "1 NC" integral contact — the 8LM actuator has no integral contact; the safety NC element is ordered separately. Confirm the exact color/code, but the type is a red twist-release mushroom actuator.)
2. User Sentiment
Lovato's 8LM Platinum e-stop actuators are a value European choice — robust metal mushroom, clear red, easy twist reset. As a safety device the key considerations are adding the correct NC contact element(s) for the required safety category (a single NC is often insufficient for monitored/redundant circuits), and pairing a yellow legend/backing plate for standard E-STOP presentation.
3. Real-World Applications
Machine/process emergency stop — press the red mushroom to latch/stop, twist to release/reset. Mounted where operators need an accessible E-STOP; wire the NC element into the safety circuit.
4. Technical Specifications
- Type: Lovato 8LM Platinum mushroom E-STOP actuator (head), 22 mm, metal
- Actuator: red Ø40 mushroom, push-to-latch, twist-to-release
- Contacts: none integral — add Lovato 8LM2TC0. NC contact element(s) + holder
- Cutout: 22 mm
- Sealing: IP65 (assembled)
- Approvals: CE, UL
5. Ordering & Compatibility
Order the mushroom actuator plus the required NC contact element(s) and holder — for a monitored/redundant safety circuit spec the correct number of NC contacts and safety category. Fits standard 22 mm cutouts, 8LM Platinum system. Pair with a yellow legend/backing plate for E-STOP identification.
6. Known Issues / DQ
- DQ: it's a modular mushroom actuator (head) with no integral contact — the stored "1 NC" was misattributed (add the NC element separately). Same modular pattern as #477/#478.
- Practical care: for safety duty verify the contact configuration and safety category/standard, confirm the twist-release and mounting, and use correct legend/backing for clear E-STOP identification.
स्रोत
- Lovato 8LM2TB840 red mushroom e-stop actuator, twist-release (8LM Platinum) — lovatoelectric.com
- Lovato 8LM2TB840 22mm red mushroom emergency stop actuator — radwell.com
स्पेसिफिकेशन
|
Actuator Function
Momentary = springs back when released. Maintained/latching = stays pressed until pressed again.
|
Twist-release
|
|
Actuator Type
The button head style. Flush sits level with the bezel (prevents accidental presses). Extended protrudes for easy access.
|
Mushroom 40mm
|
|
Certifications
Third-party safety certifications. UL = required for US NEC installations. CE = EU compliance. CSA = Canadian standards.
|
CE, UL
|
|
Color
Button/actuator color. Green = start/go, Red = stop/emergency, Yellow = caution, Blue = reset (per IEC 60204-1).
|
Red
|
|
Contact Configuration
Normally Open — circuit is off until you press. Standard for start/go/enable functions.
|
None integral (mushroom ACTUATOR/head-only; add Lovato 8LM2TC NC contact element + holder)
|
|
Cutout Diameter
The hole size you drill in your panel to mount this button. 22mm is the most common industrial standard worldwide.
|
22mm
|
|
Device type
|
Lovato 8LM Platinum mushroom E-STOP actuator (Ø40 red, twist-release; head-only)
|
|
Pn note
|
8LM2TB is an ACTUATOR (head) — contact element separate (cf #477/#478). Stored 1NC misattributed; add NC element(s) per safety category. Type = red twist-release mushroom e-stop actuator.
|
इंस्टॉलेशन त्वरित संदर्भ
Panel cutout: 22mm. Mount with the yellow backing plate visible (required by EN/ISO 13850).
Wiring: Wire NC contacts in series with the safety relay input channels. Use dual-channel wiring for SIL 3 / PLe applications. Never wire directly to a motor contactor.
Testing: Press the e-stop and verify the machine stops within the required time. Test the reset mechanism. Repeat monthly per EN/ISO 13850.
आयाम
वायरिंग डायग्राम
समस्या निवारण
E-stop won't reset (twist/pull doesn't release)
Check for debris in the mechanism. For twist-release: turn clockwise 45-90 degrees. For push-pull: pull straight out firmly. If the mechanism is stuck, the internal latch may be damaged — replace the entire head assembly.
Machine doesn't stop when e-stop is pressed
Critical safety issue. Immediately lock out the machine. Check wiring — NC contacts must be in series with the safety relay. Verify the safety relay is functioning. A broken wire in an NC circuit should cause a stop, so check for a wiring bypass.
Safety relay faults after e-stop reset
The safety relay detects a cross-fault between the two monitoring channels. Check that both NC contacts on the e-stop are switching simultaneously. One contact may be welded closed — replace the contact block.
कहाँ से खरीदें
मूल्य सीमा
$26.47 — $166.24
across 2 sellers in US dollars
संक्षिप्त स्पेसिफिकेशन
- Actuator Function
- Twist-release
- Actuator Type
- Mushroom 40mm
- Certifications
- CE, UL
- Color
- Red
- Contact Configuration
- None integral (mushroom ACTUATOR/head-only; add Lovato 8LM2TC NC contact element + holder)
उपयोगकर्ता क्या कह रहे हैं
“Italian e-stop. Competitive alternative to Schneider/ABB for European machine builders watching costs.”