KDS300
सक्रियKDS300 Standard Hall Button (LED Illuminated)
Standard LED-illuminated hall call push button from KONE. Clean minimal design with bright LED ring illumination indicating call registration. Part of KONE's signalization product line for new installations and modernizations.
सामान्य अनुप्रयोग
Installed at elevator landings (hall stations) to register up/down calls. The LED ring provides clear visual feedback that the call has been accepted. Designed for office buildings, hotels, and residential high-rises. Compatible with KONE destination dispatch systems.
स्पेसिफिकेशन
|
ADA Compliant
Meets Americans with Disabilities Act requirements for accessible design.
|
yes (EN 81-70, ASME A17.1)
|
|
Braille Compatible
Whether the button has Braille markings for visually impaired users. Required by ADA in the US.
|
yes
|
|
Certifications
Third-party safety certifications. UL = required for US NEC installations. CE = EU compliance. CSA = Canadian standards.
|
CE, EN 81-70, EN 81-20
|
|
Illumination
Whether the button has a built-in light. Illuminated buttons show status (lit = active).
|
LED ring, white
|
|
IP Rating
Ingress Protection rating — first digit is dust (0-6), second is water (0-9). Higher is better.
|
IP54
|
|
LED Voltage
The voltage required for the built-in LED. Must match your control circuit voltage (typically 24V DC or 230V AC).
|
24V DC
|
|
Material
The bezel/body material. Metal bezels are more durable in harsh environments. Plastic is lighter and cheaper.
|
Brushed stainless steel
|
|
Mechanical Life
How many press cycles before mechanical failure. Higher is better — 10M cycles at 100 presses/day = 274 years.
|
1,000,000 cycles
|
|
Mounting Type
How the button attaches to the panel. Panel mount is standard — installs through a cutout from the front.
|
flush
|
|
Max Operating Temp
Highest temperature the button is rated to operate in.
|
55°C
|
|
Min Operating Temp
Lowest temperature the button is rated to operate in.
|
-10°C
|
|
Vandal Rating (IK)
IK rating for impact resistance. IK09 = 10 joules (hammer blow). IK10 = 20 joules (serious vandalism). Higher is tougher.
|
IK08 (5J impact)
|
इस आइकन वाले स्पेसिफिकेशन निर्माता के मूल स्रोत पृष्ठ से जुड़े हैं
इंस्टॉलेशन त्वरित संदर्भ
Installation: Professional elevator technician required. Must comply with local elevator codes (ASME A17.1 / EN 81). Braille plates must be positioned per ADA requirements (48" max height for side reach).
आयाम
समस्या निवारण
Not responding to input
Check wiring continuity with a multimeter. Verify the contact block is properly seated. Inspect terminals for loose connections.
कहाँ से खरीदें
संक्षिप्त स्पेसिफिकेशन
- ADA Compliant
- yes (EN 81-70, ASME A17.1)
- Braille Compatible
- yes
- Certifications
- CE, EN 81-70, EN 81-20
- Illumination
- LED ring, white
- IP Rating
- IP54
उपयोगकर्ता क्या कह रहे हैं
“KONE KDS300 is spec-compliant and holds up in real buildings. ADA and local code compliance is the priority — aesthetics are secondary.”
और जानें
डेटा स्रोत
स्पेसिफिकेशन और उत्पाद डेटा निम्नलिखित संदर्भों से प्राप्त।