KDS300
AktiivneKDS300 Standard Hall Button (LED Illuminated)
Standard LED-illuminated hall call push button from KONE. Clean minimal design with bright LED ring illumination indicating call registration. Part of KONE's signalization product line for new installations and modernizations.
Tüüpilised rakendused
Installed at elevator landings (hall stations) to register up/down calls. The LED ring provides clear visual feedback that the call has been accepted. Designed for office buildings, hotels, and residential high-rises. Compatible with KONE destination dispatch systems.
Spetsifikatsioonid
|
ADA Compliant
Meets Americans with Disabilities Act requirements for accessible design.
|
yes (EN 81-70, ASME A17.1)
|
|
Braille Compatible
Whether the button has Braille markings for visually impaired users. Required by ADA in the US.
|
yes
|
|
Certifications
Third-party safety certifications. UL = required for US NEC installations. CE = EU compliance. CSA = Canadian standards.
|
CE, EN 81-70, EN 81-20
|
|
Illumination
Whether the button has a built-in light. Illuminated buttons show status (lit = active).
|
LED ring, white
|
|
IP Rating
Ingress Protection rating — first digit is dust (0-6), second is water (0-9). Higher is better.
|
IP54
|
|
LED Voltage
The voltage required for the built-in LED. Must match your control circuit voltage (typically 24V DC or 230V AC).
|
24V DC
|
|
Material
The bezel/body material. Metal bezels are more durable in harsh environments. Plastic is lighter and cheaper.
|
Brushed stainless steel
|
|
Mechanical Life
How many press cycles before mechanical failure. Higher is better — 10M cycles at 100 presses/day = 274 years.
|
1,000,000 cycles
|
|
Mounting Type
How the button attaches to the panel. Panel mount is standard — installs through a cutout from the front.
|
flush
|
|
Max Operating Temp
Highest temperature the button is rated to operate in.
|
55°C
|
|
Min Operating Temp
Lowest temperature the button is rated to operate in.
|
-10°C
|
|
Vandal Rating (IK)
IK rating for impact resistance. IK09 = 10 joules (hammer blow). IK10 = 20 joules (serious vandalism). Higher is tougher.
|
IK08 (5J impact)
|
Selle ikooniga spetsifikatsioonid viitavad tootja algsele lehele
Paigalduse kiirjuhend
Installation: Professional elevator technician required. Must comply with local elevator codes (ASME A17.1 / EN 81). Braille plates must be positioned per ADA requirements (48" max height for side reach).
Mõõtmed
Veaotsing
Not responding to input
Check wiring continuity with a multimeter. Verify the contact block is properly seated. Inspect terminals for loose connections.
Kust osta
Kiirspetsifikatsioonid
- ADA Compliant
- yes (EN 81-70, ASME A17.1)
- Braille Compatible
- yes
- Certifications
- CE, EN 81-70, EN 81-20
- Illumination
- LED ring, white
- IP Rating
- IP54
Mida kasutajad ütlevad
“KONE KDS300 is spec-compliant and holds up in real buildings. ADA and local code compliance is the priority — aesthetics are secondary.”
Lisateave
Andmeallikad
Spetsifikatsioonid ja tooteandmed pärinevad järgmistest allikatest.