Pushbutton Switches Push button Non Illuminated
अनुसंधान नोट्स
1. What this is
LW1B-A1C6M-G-MVF-VJ-1 is an IDEC LW-series 22mm oiltight command switch (operator + contact block + button, sub-assembled unit). This specific variant is Momentary.
2. Part-number decode
- Series: IDEC LW — 22mm command-switch
- Operation: Momentary
- Construction: modular — sold as a sub-assembled unit (operator + contact block + button); contact blocks are separate stackable parts
3. Compatibility & ordering
Panel cutout: 22mm. As a modular IEC command switch, the operator, contact block(s), and button/lens are separate stackable parts — match the contact arrangement to your circuit and add or swap contact blocks as needed. Cross-reference by size, operation, contact arrangement, and color to an equivalent from another IEC command-switch line (Schneider Harmony, Allen-Bradley 800F/800T, Siemens 3SU, Eaton M22) if IDEC is unavailable.
4. Data-quality note
This page is generated by decoding IDEC's published part-number scheme for the LW series (grounded in IDEC's series datasheets and IDEC USA's catalog). The structured fields above follow directly from the code.
5. Sources
- IDEC LW-series datasheet / ordering guide (idec.com)
- IDEC USA catalog: https://us.idec.com (search the exact part number)
स्रोत
- IDEC USA catalog — LW1B-A1C6M-G-MVF-VJ-1 — us.idec.com
स्पेसिफिकेशन
|
Device class
|
command-switch
|
|
Enriched by
|
idec-decoder-2026-08-12
|
|
Lead time
|
0 Days
|
|
Manufacturer series
|
LW
|
|
Modular
|
true
|
|
Mouser part number
|
199-LW1BA1C6MGMVFVJ1
|
|
Operation
|
Momentary
|
|
Panel cutout
|
22mm
|
|
Pn status
|
decoded
|
|
Rohs status
|
|
|
Series description
|
IDEC LW-series 22mm oiltight command switch (operator + contact block + button, sub-assembled unit)
|
इंस्टॉलेशन त्वरित संदर्भ
Panel cutout: 22mm. Insert from the front of the panel, secure with mounting nut from behind (tighten to 2-3 Nm).
Contact block: Snap or screw the contact block onto the rear of the button body. Ensure the contact block orientation matches the wiring diagram — NO terminals are usually marked.
Wiring: Use 0.5-2.5mm² stranded wire with ferrules. Tighten screw terminals to 0.8 Nm. Test the button function before energizing the circuit.
आयाम
समस्या निवारण
Button doesn't respond when pressed
Check the contact block first — it's the most common failure point. Test continuity across the NO or NC terminals with a multimeter. If no click is felt, the return spring in the head may be broken.
Works intermittently
Contact block contacts are pitted or burned. Replace the contact block — don't try to file the contacts. Check if the rated cycle count has been exceeded.
Button feels mushy or doesn't click
The spring return mechanism in the button head is worn. Replace the head. The contact block can usually be reused if it tests OK.
कहाँ से खरीदें
संक्षिप्त स्पेसिफिकेशन
- Device class
- command-switch
- Enriched by
- idec-decoder-2026-08-12
- Lead time
- 0 Days
- Manufacturer series
- LW
- Modular
- true