NAEVIES EC 45G TACTILE SWITCHES 35 PACK

Name: AEBoards NAEVIES EC 45G TACTILE SWITCHES 35 PACK
Brand: AEBoards
SKU: NAEVIES EC 45G TACTILE SWITCHES 35 PACK
Price: 25.0 USD
Availability: InStock

सक्रिय

AEBoards Naevies EC 45g Tactile Switches 35 Pack

45g tactile dome 56.4g peak force 37.1g bottom out force 3.72mm total travel Nylon stem and housing Electrocapacitive switches with MX footprint Compatible with MX stabilizers and keycaps From the designers at Keyboard Treehouse "Gone are the days of hunting down rubber dome sheets, springs, sliders and stabilisers. No longer will you suffer topre pains where you've misaligned the rubber domes, or clipping your GMK keycaps to fit into stabilisers. We've taken what we love from Topre and refined it into a Cherry MX compatible switch, using the 14x14mm footprint, it allows compatibility with MX stabilisers and MX keycaps. The weight of Naevies EC switches is 45g.

अनुसंधान नोट्स

1. What this is

AEBoards Naevies EC 45g Tactile Switches 35 Pack is a mechanical keyboard switch from AEBoards. It is tactile, 45g.

2. Spec decode (from product name)

Switch type: tactile
Actuation force: 45g

3. Compatibility & use

Standard MX-style keyboard switch. Choose by feel (linear/tactile/clicky), actuation force, and sound (silent vs standard); 5-pin PCB-mount switches also fit plate-mount boards. Hot-swap or solder depending on your board.

4. Data-quality note

The switch type, force, and/or mount are decoded from the product name (the standard way keyboard switches are specified). Confirm exact spring curve, travel, and housing/stem material against the manufacturer's spec if precision matters. (Note: some of these rows are catalogued under a generic push-button/arcade-button category in the source data; the correct device class is keyboard switch, recorded in the specs above.)

5. Sources

AEBoards product page / keyboard-switch community databases
Distributor / vendor listing — search the exact switch name

स्रोत

AEBoards AEBoards Naevies EC 45g Tactile Switches 35 Pack — keyboard-switch spec

स्पेसिफिकेशन

Actuation Force The force needed to press the button. Lower = more sensitive. Sanwa ~65g (light), Seimitsu ~85g (medium), Happ ~130g (heavy).	45g
Device class	mechanical keyboard switch
Enriched by	keyboard-decoder-2026-08-12
Pn status	decoded
Product type	Keyboard Switches
Series description	AEBoards mechanical keyboard switch (tactile)
Shopify id	10080065978668
Switch type	tactile
Vendor	AEBoards

इंस्टॉलेशन त्वरित संदर्भ

Panel cutout: 22mm. Insert from the front of the panel, secure with mounting nut from behind (tighten to 2-3 Nm).

Contact block: Snap or screw the contact block onto the rear of the button body. Ensure the contact block orientation matches the wiring diagram — NO terminals are usually marked.

Wiring: Use 0.5-2.5mm² stranded wire with ferrules. Tighten screw terminals to 0.8 Nm. Test the button function before energizing the circuit.

आयाम

समस्या निवारण

Button doesn't respond when pressed

Check the contact block first — it's the most common failure point. Test continuity across the NO or NC terminals with a multimeter. If no click is felt, the return spring in the head may be broken.

Works intermittently

Contact block contacts are pitted or burned. Replace the contact block — don't try to file the contacts. Check if the rated cycle count has been exceeded.

Button feels mushy or doesn't click

The spring return mechanism in the button head is worn. Replace the head. The contact block can usually be reused if it tests OK.