4337
ActifPush Button Circuit Breaker 30A
Blue Sea CLB push button circuit breaker — switch and overcurrent protection in one.
Applications courantes
Combination push button switch and circuit breaker for marine DC circuits. Press to turn on, press again to turn off. Automatically trips on overcurrent. Replaces separate switch + fuse with one device. Found on boat electrical panels worldwide. Available in 5-50A ratings.
Spécifications
|
Actuator Function
Momentary = springs back when released. Maintained/latching = stays pressed until pressed again.
|
Push-push (maintained)
|
|
Certifications
Third-party safety certifications. UL = required for US NEC installations. CE = EU compliance. CSA = Canadian standards.
|
UL 1077, ABYC E-11, ISO 8846
|
|
Color
Button/actuator color. Green = start/go, Red = stop/emergency, Yellow = caution, Blue = reset (per IEC 60204-1).
|
White
|
|
Contact Configuration
The electrical switching arrangement.
|
SPST with 30A breaker
|
|
Material
The bezel/body material. Metal bezels are more durable in harsh environments. Plastic is lighter and cheaper.
|
Phenolic
|
Référence rapide d'installation
Panel cutout: 22mm. Insert from the front of the panel, secure with mounting nut from behind (tighten to 2-3 Nm).
Contact block: Snap or screw the contact block onto the rear of the button body. Ensure the contact block orientation matches the wiring diagram — NO terminals are usually marked.
Wiring: Use 0.5-2.5mm² stranded wire with ferrules. Tighten screw terminals to 0.8 Nm. Test the button function before energizing the circuit.
Dimensions
Schéma de câblage
Dépannage
Button doesn't respond when pressed
Check the contact block first — it's the most common failure point. Test continuity across the NO or NC terminals with a multimeter. If no click is felt, the return spring in the head may be broken.
Works intermittently
Contact block contacts are pitted or burned. Replace the contact block — don't try to file the contacts. Check if the rated cycle count has been exceeded.
Button feels mushy or doesn't click
The spring return mechanism in the button head is worn. Replace the head. The contact block can usually be reused if it tests OK.
Où acheter
Fourchette de prix
$0.21 — $76.3
chez 3 distributeurs
Spécifications rapides
- Actuator Function
- Push-push (maintained)
- Certifications
- UL 1077, ABYC E-11, ISO 8846
- Color
- White
- Contact Configuration
- SPST with 30A breaker
- Material
- Phenolic
Ce qu'en disent les utilisateurs
“Combination push button switch and circuit breaker for marine DC circuits. Press to turn on, press again to turn off. Automatically trips on overcurrent. Replaces separate switch + fuse with one devic”
En savoir plus
Indices de protection IP expliqués
Ce que signifient IP65, IP66, IP67, IP69K pour votre application
Guide 22mm vs 30mm
Quelle taille de découpe de panneau vous faut-il ?
Blocs de contact : NO vs NC
Comment choisir et câbler les blocs de contact
Outil de recherche de boutons
Trouvez le bon bouton par type, taille et couleur