807501313

Actif

Auer Signal 807501313

Auer Signal 807501313 — Auer Signal 807501313

Beacons BLG LED flashing beacon 230-240 V AC amber, black

Notes de Recherche

1. What this is

807501313 ("Auer Signal 807501313") is catalogued as a push-button / switch device from Auer Signal.

2. What we know

  • Manufacturer: Auer Signal
  • Category: push-button / switch device
  • Part number / name: 807501313 — Auer Signal 807501313
  • Auer Signal — see the manufacturer's catalog for this part.

3. How to identify / order the exact part

The full specifications for this part are not machine-decodable from the data we hold. To confirm the exact configuration (contacts, rating, colour, mounting, protocol), search the Auer Signal catalog for this part number on the manufacturer site or a distributor (DigiKey / Mouser / RS).

4. Data-quality note

This page is generated from the catalogued manufacturer, category, and product name. Per our keep-and-document policy we publish a page for every part we hold and state plainly what is known versus what needs verification, rather than deleting the row or inventing specs. Flagged needs-verification.

5. Sources

  • Auer Signal product catalog — search "807501313" / "Auer Signal 807501313"

Verified distributor data (Mouser)

This part is carried by Mouser Electronics; the description and datasheet above come straight from the distributor's catalog, confirming and expanding the part-number decode above.


Source
  1. Auer Signal 807501313 — distributor/catalog

Spécifications

Datasheet url
https://www.mouser.com/datasheet/3/5974/1/097a9621_c137_4d33_8502_ef928b132d9e.pdf
Device class
push-button
Enriched by
generic-fallback-2026-08-12
Lead time
0 Days
Mouser checked
2026-09-28
Mouser description
Beacons BLG LED flashing beacon 230-240 V AC amber, black
Mouser matched
true
Mouser part number
900-807501313
Pn status
verified
Rohs status
RoHS Compliant

Référence rapide d'installation

Panel cutout: 22mm. Insert from the front of the panel, secure with mounting nut from behind (tighten to 2-3 Nm).

Contact block: Snap or screw the contact block onto the rear of the button body. Ensure the contact block orientation matches the wiring diagram — NO terminals are usually marked.

Wiring: Use 0.5-2.5mm² stranded wire with ferrules. Tighten screw terminals to 0.8 Nm. Test the button function before energizing the circuit.

Dimensions

Dépannage

Button doesn't respond when pressed

Check the contact block first — it's the most common failure point. Test continuity across the NO or NC terminals with a multimeter. If no click is felt, the return spring in the head may be broken.

Works intermittently

Contact block contacts are pitted or burned. Replace the contact block — don't try to file the contacts. Check if the rated cycle count has been exceeded.

Button feels mushy or doesn't click

The spring return mechanism in the button head is worn. Replace the head. The contact block can usually be reused if it tests OK.

Photos & Dessins

Images : mouser.com

Spécifications rapides

Datasheet url
https://www.mouser.com/datasheet/3/5974/1/097a9621_c137_4d33_8502_ef928b132d9e.pdf
Device class
push-button
Enriched by
generic-fallback-2026-08-12
Lead time
0 Days
Mouser checked
2026-09-28