WXCJKG13LM
ActifAqara Opple 6-Button Wireless Switch
Aqara Opple 6-button wireless scene controller — most buttons in one device.
Applications courantes
Six buttons in a wall-plate form factor. Each button supports single, double, and long press — 18 total actions from one device. The most capable wireless button panel available. Controls an entire smart home from one spot. Works with Zigbee2MQTT and Home Assistant.
Ouverture et modifiabilité
Excellent Zigbee2MQTT/ZHA support. Works without Aqara Hub. Full multi-click events in Home Assistant.
Spécifications
|
Battery Life
Expected battery life under normal use. BLE buttons typically last 1-2 years on a coin cell.
|
2 years
|
|
Battery Type
The battery used. CR2032 = common coin cell, easy to replace. AAA = higher capacity. USB-C = rechargeable.
|
CR2450
|
|
Color
Button/actuator color. Green = start/go, Red = stop/emergency, Yellow = caution, Blue = reset (per IEC 60204-1).
|
White
|
|
Smart Home Integrations
Compatible smart home platforms and voice assistants.
|
Aqara Home, HomeKit (via Hub), Home Assistant
|
|
Mounting Type
How the button attaches to the panel. Panel mount is standard — installs through a cutout from the front.
|
Wall plate (86mm standard)
|
|
Protocol
The wireless communication standard. BLE = short range, phone direct. Zigbee = mesh network, needs hub. Z-Wave = mesh, needs hub. WiFi = direct, higher power.
|
Zigbee 3.0
|
Référence rapide d'installation
Setup: Pair with your hub or phone via Zigbee 3.0. Most smart buttons support single press, double press, and long press for three different actions.
Battery: Uses CR2450 battery. Expected life: 2 years. Low battery notification via the app.
Dimensions
Dépannage
Not responding to input
Check wiring continuity with a multimeter. Verify the contact block is properly seated. Inspect terminals for loose connections.
Où acheter
Fourchette de prix
$72.61 — $86.83
chez 2 distributeurs
Spécifications rapides
- Battery Life
- 2 years
- Battery Type
- CR2450
- Color
- White
- Smart Home Integrations
- Aqara Home, HomeKit (via Hub), Home Assistant
- Mounting Type
- Wall plate (86mm standard)
Ce qu'en disent les utilisateurs
“Six buttons in a wall-plate form factor. Each button supports single, double, and long press — 18 total actions from one device. The most capable wireless button panel available. Controls an entire sm”
