WXCJKG13LM
AktivAqara Opple 6-Button Wireless Switch
Aqara Opple 6-button wireless scene controller — most buttons in one device.
Typische Anwendungen
Six buttons in a wall-plate form factor. Each button supports single, double, and long press — 18 total actions from one device. The most capable wireless button panel available. Controls an entire smart home from one spot. Works with Zigbee2MQTT and Home Assistant.
Offenheit & Modifizierbarkeit
Excellent Zigbee2MQTT/ZHA support. Works without Aqara Hub. Full multi-click events in Home Assistant.
Spezifikationen
|
Battery Life
Expected battery life under normal use. BLE buttons typically last 1-2 years on a coin cell.
|
2 years
|
|
Battery Type
The battery used. CR2032 = common coin cell, easy to replace. AAA = higher capacity. USB-C = rechargeable.
|
CR2450
|
|
Color
Button/actuator color. Green = start/go, Red = stop/emergency, Yellow = caution, Blue = reset (per IEC 60204-1).
|
White
|
|
Smart Home Integrations
Compatible smart home platforms and voice assistants.
|
Aqara Home, HomeKit (via Hub), Home Assistant
|
|
Mounting Type
How the button attaches to the panel. Panel mount is standard — installs through a cutout from the front.
|
Wall plate (86mm standard)
|
|
Protocol
The wireless communication standard. BLE = short range, phone direct. Zigbee = mesh network, needs hub. Z-Wave = mesh, needs hub. WiFi = direct, higher power.
|
Zigbee 3.0
|
Installationskurzanleitung
Setup: Pair with your hub or phone via Zigbee 3.0. Most smart buttons support single press, double press, and long press for three different actions.
Battery: Uses CR2450 battery. Expected life: 2 years. Low battery notification via the app.
Abmessungen
Fehlerbehebung
Not responding to input
Check wiring continuity with a multimeter. Verify the contact block is properly seated. Inspect terminals for loose connections.
Bezugsquellen
Preisbereich
$72.61 — $86.83
bei 2 Händlern
Kurzspezifikationen
- Battery Life
- 2 years
- Battery Type
- CR2450
- Color
- White
- Smart Home Integrations
- Aqara Home, HomeKit (via Hub), Home Assistant
- Mounting Type
- Wall plate (86mm standard)
Das sagen Anwender
“Six buttons in a wall-plate form factor. Each button supports single, double, and long press — 18 total actions from one device. The most capable wireless button panel available. Controls an entire sm”
