3SU1132-0AB20-1BA0
AktiivneSIRIUS ACT Red Illuminated Flush Pushbutton 1NO 24V
Siemens SIRIUS ACT illuminated red flush button.
Tüüpilised rakendused
Red illuminated for fault/stop on Siemens panels. LED lit = fault active. Metal front ring.
Research Notes
1. Overview
The catalog MLFB 3SU1132-0AB20-1BA1 does not exist — zero web hits, absent from Siemens' datasheet index, SiePortal, Industry Mall, and every distributor checked. It's a corrupted variant of the genuine, actively-sold 3SU1132-0AB20-1BA0: a SIRIUS ACT 3SU1 complete-device pushbutton — 22mm round, plastic with metal front ring, red, illuminated, flush actuator, momentary, 1 NO contact, LED module 24V AC/DC, screw terminal. SIRIUS ACT is modular: this "complete unit" bundles head + holder + LED module + contact block, but the head also sells bare (3SU1002 series) for pairing with separate plug-in contact modules (3SU1400 series, up to 6 contacts).
2. User Sentiment
No forum/community discussion — a commodity industrial part sourced via distributors. Framing across RS Components and regional resellers is neutral/routine.
3. Real-World Applications
Standard 22mm panel pushbutton for machine HMI stations and motor-control cabinets. Red illuminated buttons here typically serve stop/reset/fault-acknowledge roles; the stackable module design lets one holder carry the head plus extra contacts for multi-function layouts.
4. Technical Specifications
- Corrected MLFB: 3SU1132-0AB20-1BA0 — no valid SIRIUS ACT suffix ends in "1"; Siemens' System Manual function-letter table shows every real suffix ending in "0" (xBA0, xCA0, xDA0, xEA0, xFA0, xGA0, xHA0, xLA0–xRA0)
- Contact: 1 NO (true value for -1BA0, function "B"; catalog's stored "1NC" mismatches this MLFB)
- Color: Red (0AB20, confirmed; contrast: 0AB40=green, 0AB60=white in-family)
- Voltage: 24V AC/DC, correct (3SU1132=24V; 3SU1136=230V, per sibling 3SU1136-0AB20-1FA0)
- Illumination: Yes; Actuator: Flush, momentary
- Front ring: Metal; Terminal: Screw
5. Ordering & Compatibility
A genuine 1NC twin exists in the same color/family — 3SU1132-0AB20-1CA0 (function "C"=1NC), confirmed red/momentary/NC by RS Components Spain. If the catalog's "1NC" field is the trustworthy anchor rather than the "-1BA1" string, -1CA0 is the correct MLFB (two edits from the stored PN vs. one for -1BA0, making -1BA0 the more parsimonious fix, though both are genuine parts). Compatible with 3SU1400-series contact modules and 3SU1002 bare holders.
6. Known Issues
Primary: stored PN is invalid — likely a single-digit typo (trailing 0→1) of 3SU1132-0AB20-1BA0. Secondary: contact-field conflict — -1BA0 is universally documented as 1NO, not the catalog's stated 1NC; if 1NC was truly intended, the correct MLFB is 3SU1132-0AB20-1CA0 instead. Recommend correcting the record to one of these two real SKUs, with MLFB and contact field brought into agreement.
16 sources
- SIRIUS ACT 3SU1 pushbuttons and signaling devices - System Manual, 05/2019, A5E03457306020A/RS-AL/011 (contact-module function-letter/suffix table, pp.173-176, 498) — Siemens (official System Manual)
- Hoja de datos 3SU1132-0AB20-1BA0 — Siemens Industry Support (teddatasheet index)
- 3SU11320AB201BA0-ZY13 Siemens Push button, complete — Omnical
- CungSu Expedited 3SU1132-0AB20-1BA0 New and Sealed in Box 3SU11320AB201BA0 — Amazon
- 3SU1132-0AB20-1BA0 SIEMENS BOTON ILUM ROJO 1NA -LED 24V AC/DC C/ANILLO -COMP PLAST — Acomee (Mexico)
- 3SU1132-0AB20-1CA0 | Siemens serie SIRIUS ACT Rojo de 29.45mm de diametro, Momentaneo NC — RS Components (Spain)
- 3SU1132-0AB20-1CA0 SIEMENS Illuminated pushbutton, 22 mm, round, plastic with metal front ring, red, 1NC — Electric Automation Network
- Pushbutton complete device Siemens SIRIUS ACT 3SU1150-0AB20-1CA0 (sibling family confirming -1CA0 = 1NC suffix pattern) — Automation24
- Siemens 3SU1102-0AB20-1BA0 | Pushbutton 1NO, 24VAC/DC - Complete push button red — Eibabo
- Siemens SIRIUS ACT 3SU11320AB401BA0 Round Standard Illuminated Pushbutton With Holder, 22mm, 1NO Contact, Flat Operator, Green — Franklin Empire
- Siemens 3SU1132-0AB40-1BA0, ILLUMINATED PUSHBUTTON, MOM, GRN, FLUSH — Motors and Control
- Siemens 3SU1100-0AB20-1BA0, PUSHBUTTON, MOM, RED, FLUSH — Motors and Control
- Siemens 3SU1136-0AB20-1FA0, ILLUMINATED PUSHBUTTON. RED (230V AC variant, confirms 3SU1136 = 230V vs 3SU1132 = 24V) — Motors and Control
- 3SU1102-0AB20-1BA0 - SiePortal — Siemens SiePortal
- 3SU1102-0AB20-1CA0 - Industry Mall product page — Siemens Industry Mall
- 3SU1102-0AB20-1CA0 | Siemens — PLC City
Spetsifikatsioonid
|
Certifications
Third-party safety certifications. UL = required for US NEC installations. CE = EU compliance. CSA = Canadian standards.
|
UL, CSA, CE
|
|
Color
Button/actuator color. Green = start/go, Red = stop/emergency, Yellow = caution, Blue = reset (per IEC 60204-1).
|
Red
|
|
Contact Configuration
Normally Open — circuit is off until you press. Standard for start/go/enable functions.
|
1NO
|
|
Cutout Diameter
The hole size you drill in your panel to mount this button. 22mm is the most common industrial standard worldwide.
|
22mm
|
|
Illumination
Whether the button has a built-in light. Illuminated buttons show status (lit = active).
|
Illuminated
|
|
IP Rating
IP67: Dust-tight and survives temporary water submersion (1m for 30 min). Handles oil splashes, steam cleaning, and rain.
|
IP67
|
|
LED Voltage
The voltage required for the built-in LED. Must match your control circuit voltage (typically 24V DC or 230V AC).
|
24V AC/DC
|
|
Material
The bezel/body material. Metal bezels are more durable in harsh environments. Plastic is lighter and cheaper.
|
Metal front ring
|
Paigalduse kiirjuhend
Panel cutout: 22mm. Insert from the front of the panel, secure with mounting nut from behind (tighten to 2-3 Nm).
Contact block: Snap or screw the contact block onto the rear of the button body. Ensure the contact block orientation matches the wiring diagram — NO terminals are usually marked.
Wiring: Use 0.5-2.5mm² stranded wire with ferrules. Tighten screw terminals to 0.8 Nm. Test the button function before energizing the circuit.
Mõõtmed
Ühenduseskeem
Veaotsing
Button doesn't respond when pressed
Check the contact block first — it's the most common failure point. Test continuity across the NO or NC terminals with a multimeter. If no click is felt, the return spring in the head may be broken.
Works intermittently
Contact block contacts are pitted or burned. Replace the contact block — don't try to file the contacts. Check if the rated cycle count has been exceeded.
Button feels mushy or doesn't click
The spring return mechanism in the button head is worn. Replace the head. The contact block can usually be reused if it tests OK.
Kust osta
Hinnavahemik
$65.12 — $66.98
2 edasimüüja juures
Kiirspetsifikatsioonid
- Certifications
- UL, CSA, CE
- Color
- Red
- Contact Configuration
- 1NO
- Cutout Diameter
- 22mm
- Illumination
- Illuminated
Mida kasutajad ütlevad
“Red illuminated for fault/stop on Siemens panels. LED lit = fault active. Metal front ring.”
