AR22F0R-01R
AktiivneAR22 22mm Red Flush Push Button 1NC
Fuji Electric AR22 red push button.
Tüüpilised rakendused
Red stop button for Fuji-controlled panels. Pairs with AR22F0R-10G green.
Research Notes
1. Overview
The Fuji Electric AR22F0R-01R is a 22 mm flush (round) command pushbutton from Fuji's AR22 series — red, non-illuminated, momentary, with a 1 NC contact (Fuji code 01 = 1 NC; R = red). It's a complete command switch (JIS Japanese standard, also UL/CE), IP65. Red + normally-closed is the classic stop/off configuration — the NC contact opens the circuit when pressed. It's the red 1 NC counterpart to the green 1 NO AR22F0R-10G (#473).
2. User Sentiment
Fuji AR22 command switches are a standard, reliable 22 mm line — solid build, JIS compliance, broad availability in Fuji/Japanese-standard control gear. Red + 1 NC is the go-to stop button. The main care point is matching the contact/operation and color from the exact model code.
3. Real-World Applications
Red STOP / OFF flush momentary pushbutton on machinery and control panels — the 1 NC contact drops out a contactor/interrupts a circuit on press. (For a latching emergency stop, use a red mushroom e-stop, not this flush momentary.)
4. Technical Specifications
- Type: Fuji AR22 flush (round) command pushbutton, 22 mm, momentary
- Color: red
- Contact: 1 NC (Fuji code "01")
- Cutout: 22 mm
- Sealing: IP65
- Approvals: JIS, UL, CE
5. Ordering & Compatibility
Fits standard 22 mm cutouts. AR22 code carries actuator style/contact/color (F0R flush round, -01 = 1 NC, R = red). Fuji AR22 offers matching illuminated, selector, and e-stop devices plus contact blocks. Confirm the exact code for color and contact.
6. Known Issues
No notable reliability issues — mainstream Fuji command switch. Practical care: verify the contact/operation (1 NC here) and color, confirm the 22 mm cutout, and note a flush momentary red button is not a latching emergency stop (use a red mushroom e-stop for safety-stop duty).
2 sources
- Fuji Electric AR22 22mm pushbuttons (contact codes) — fujielectric.com
- Fuji AR22F0R-01R 22mm red flush pushbutton 1NC — automationdirect.com
Spetsifikatsioonid
|
Actuator Function
Momentary = springs back when released. Maintained/latching = stays pressed until pressed again.
|
Momentary; red 1NC = stop/off (NOT a latching e-stop)
|
|
Actuator Type
The button head style. Flush sits level with the bezel (prevents accidental presses). Extended protrudes for easy access.
|
Flush
|
|
Certifications
Third-party safety certifications. UL = required for US NEC installations. CE = EU compliance. CSA = Canadian standards.
|
JIS, UL, CE
|
|
Color
Button/actuator color. Green = start/go, Red = stop/emergency, Yellow = caution, Blue = reset (per IEC 60204-1).
|
Red
|
|
Contact Configuration
Normally Closed — circuit is on until you press. Standard for stop/emergency functions. Wire in series with safety circuits.
|
1NC
|
|
Cutout Diameter
The hole size you drill in your panel to mount this button. 22mm is the most common industrial standard worldwide.
|
22mm
|
|
Device type
|
Fuji AR22 22mm flush command pushbutton (red/stop, 1NC; contact in code)
|
|
IP Rating
IP65: Dust-tight and protected against low-pressure water jets. Suitable for indoor industrial and light washdown.
|
IP65
|
Paigalduse kiirjuhend
Panel cutout: 22mm. Insert from the front of the panel, secure with mounting nut from behind (tighten to 2-3 Nm).
Contact block: Snap or screw the contact block onto the rear of the button body. Ensure the contact block orientation matches the wiring diagram — NO terminals are usually marked.
Wiring: Use 0.5-2.5mm² stranded wire with ferrules. Tighten screw terminals to 0.8 Nm. Test the button function before energizing the circuit.
Mõõtmed
Ühenduseskeem
Veaotsing
Button doesn't respond when pressed
Check the contact block first — it's the most common failure point. Test continuity across the NO or NC terminals with a multimeter. If no click is felt, the return spring in the head may be broken.
Works intermittently
Contact block contacts are pitted or burned. Replace the contact block — don't try to file the contacts. Check if the rated cycle count has been exceeded.
Button feels mushy or doesn't click
The spring return mechanism in the button head is worn. Replace the head. The contact block can usually be reused if it tests OK.
Kust osta
Hinnavahemik
$23.68 — $37.55
2 edasimüüja juures
Kiirspetsifikatsioonid
- Actuator Function
- Momentary; red 1NC = stop/off (NOT a latching e-stop)
- Actuator Type
- Flush
- Certifications
- JIS, UL, CE
- Color
- Red
- Contact Configuration
- 1NC
Mida kasutajad ütlevad
“Red stop button for Fuji-controlled panels. Pairs with AR22F0R-10G green.”