OBSFS-30
AktivOBSFS-30 Silent 30mm Snap-in
Sanwa OBSFS-30 — silenced version for quiet play.
Typische Anwendungen
Same Sanwa quality with integrated silicone dampeners. Reduces button noise by ~50%. Popular for apartment setups and tournament venues where button noise is excessive. Same 65g actuation, slightly shorter travel due to dampeners.
Spezifikationen
|
Actuation Force
The force needed to press the button. Lower = more sensitive. Sanwa ~65g (light), Seimitsu ~85g (medium), Happ ~130g (heavy).
|
65g
|
|
Color
Button/actuator color. Green = start/go, Red = stop/emergency, Yellow = caution, Blue = reset (per IEC 60204-1).
|
Various
|
|
Diameter
|
30mm
|
|
Microswitch Type
The internal switch mechanism. Built-in = sealed unit. Cherry D44X = replaceable, clicky. Omron = quieter, longer life.
|
Built-in (silenced)
|
|
Mounting Type
How the button attaches to the panel. Panel mount is standard — installs through a cutout from the front.
|
Snap-in
|
|
Travel Distance
How far the button moves when pressed. Shorter = faster response. Sanwa 0.85mm is extremely short for competitive gaming.
|
0.7mm (dampened)
|
Installationskurzanleitung
Mounting: Snap-in buttons push into a 30mm hole from the top of the panel. Screw-in buttons thread from below and secure with a nut. Use 2-3mm acrylic, wood, or metal panel.
Wiring: Connect the microswitch terminals to your encoder or PCB. Common ground shared across all buttons. Quick-disconnect (0.110") terminals are standard on Japanese buttons.
Abmessungen
Fehlerbehebung
Not responding to input
Check wiring continuity with a multimeter. Verify the contact block is properly seated. Inspect terminals for loose connections.
Bezugsquellen
Preisbereich
$5.0 — $40.12
bei 2 Händlern
Kurzspezifikationen
- Actuation Force
- 65g
- Color
- Various
- Diameter
- 30mm
- Microswitch Type
- Built-in (silenced)
- Mounting Type
- Snap-in
Das sagen Anwender
“Same Sanwa quality with integrated silicone dampeners. Reduces button noise by ~50%. Popular for apartment setups and tournament venues where button noise is excessive. Same 65g actuation, slightly sh”
