SKQGAFE010
AktivSKQG 6x6mm Tactile Switch 160gf
Alps Alpine SKQG 6x6mm through-hole tactile switch — the most common PCB push button.
Typische Anwendungen
Found in literally billions of devices — TV remotes, routers, Arduino projects, consumer electronics, appliance control panels, and automotive dashboards. The 6x6mm footprint is the global standard for PCB-mount push buttons. Alps is the OEM behind the tactile buttons in most Japanese electronics.
Spezifikationen
|
Actuation Force
The force needed to press the button. Lower = more sensitive. Sanwa ~65g (light), Seimitsu ~85g (medium), Happ ~130g (heavy).
|
160gf (1.57N)
|
|
Certifications
Third-party safety certifications. UL = required for US NEC installations. CE = EU compliance. CSA = Canadian standards.
|
UL, CE
|
|
Mechanical Life
How many press cycles before mechanical failure. Higher is better — 10M cycles at 100 presses/day = 274 years.
|
300,000 cycles
|
|
Mounting Type
How the button attaches to the panel. Panel mount is standard — installs through a cutout from the front.
|
Through-hole PCB
|
|
Max Operating Temp
Highest temperature the button is rated to operate in.
|
85°C
|
|
Min Operating Temp
Lowest temperature the button is rated to operate in.
|
-40°C
|
|
Travel Distance
How far the button moves when pressed. Shorter = faster response. Sanwa 0.85mm is extremely short for competitive gaming.
|
0.25mm
|
Kompatible Alternativen
Diese Produkte sind funktional gleichwertige Querverweise anderer Hersteller.
Installationskurzanleitung
Panel cutout: 22mm. Insert from the front of the panel, secure with mounting nut from behind (tighten to 2-3 Nm).
Contact block: Snap or screw the contact block onto the rear of the button body. Ensure the contact block orientation matches the wiring diagram — NO terminals are usually marked.
Wiring: Use 0.5-2.5mm² stranded wire with ferrules. Tighten screw terminals to 0.8 Nm. Test the button function before energizing the circuit.
Abmessungen
Fehlerbehebung
Button doesn't respond when pressed
Check the contact block first — it's the most common failure point. Test continuity across the NO or NC terminals with a multimeter. If no click is felt, the return spring in the head may be broken.
Works intermittently
Contact block contacts are pitted or burned. Replace the contact block — don't try to file the contacts. Check if the rated cycle count has been exceeded.
Button feels mushy or doesn't click
The spring return mechanism in the button head is worn. Replace the head. The contact block can usually be reused if it tests OK.
Bezugsquellen
Preisbereich
$0.34 — $79.13
bei 3 Händlern
Kurzspezifikationen
- Actuation Force
- 160gf (1.57N)
- Certifications
- UL, CE
- Mechanical Life
- 300,000 cycles
- Mounting Type
- Through-hole PCB
- Max Operating Temp
- 85°C
Das sagen Anwender
“Found in literally billions of devices — TV remotes, routers, Arduino projects, consumer electronics, appliance control panels, and automotive dashboards. The 6x6mm footprint is the global standard fo”
