CTS Corporation · 219 Series

219-4MST

Active
AEC-Q200 UL

219 Series 6x6mm Tactile Switch

CTS Corporation 219 Series Introduced circa 2010

CTS 219 series standard 6x6mm tactile switch for automotive and industrial.

Common Applications

CTS tactile switches are qualified for automotive dashboards — AEC-Q200 compliant with operating range to 105°C. Found in car HVAC controls, infotainment buttons, and instrument cluster interfaces. Also used in white goods (washing machines, dishwashers) and industrial membrane keypads.

Research Notes

1. Overview

The CTS 219-4MST is a 4-position SPST surface-mount slide DIP switch belonging to CTS Corporation's Series 219 SMT family. CTS Corporation (formerly CTS Electrocomponents) is a veteran U.S. electromechanical components manufacturer; the 219 series is their primary SMT DIP switch line, offered in 2–12 position variants. The "MST" suffix designates surface-mount, top-actuated, tube-packaged configuration, distinguishing it from the tape-reel variant (219-4MSR). The switch features redundant bifurcated gold-plated beryllium copper contacts — a CTS design highlight explicitly cited in their datasheet as reducing contact failure probability while providing superior environmental protection.

2. User Sentiment

No significant forum or community discussion was found for this component — it is a commodity industrial DIP switch used primarily by engineers for board-level configuration, not a consumer-facing product. Technical aggregators (FindChips, DigiKey) describe it matter-of-factly as suitable for low-power configuration applications. Its global stocking across dozens of authorized distributors (Mouser, DigiKey, Newark/Farnell, RS, Arrow, JLCPCB, Avnet, and regional distributors in Japan, Korea, Russia, China, Philippines, Singapore) points to reliable demand and broad acceptance in the industry. No reliability complaints or known failure modes appear in the indexed sources.

3. Real-World Applications

The 219-4MST is used wherever board-level binary configuration is needed in a compact SMT footprint: network equipment (telecom), industrial control panel interfaces, security system hardware, consumer audio/video equipment, computing peripherals, and data storage. FindChips blog identifies consumer electronics, telecommunications, computing/data storage, and industrial automation as the four primary sectors. Its washable construction (removable tape seal survives IR reflow, vapor phase, and wave soldering plus board washing) makes it particularly well-suited to automated PCB assembly lines.

4. Technical Specifications

  • Type: SPST, 4-position slide DIP switch (latched ON/OFF per position)
  • Mounting: Surface Mount (SMD), top-actuated; gull-wing or J-bend terminals
  • Pitch: 2.54 mm (0.100" full pitch)
  • Contact Rating: 100 mA @ 20 VDC (rated operating); 100 mA @ 50 VDC (max contact voltage)
  • Contact Resistance: 0.05 mΩ (milliohm)
  • Insulation Resistance: 1 GΩ (1,000 MΩ) minimum
  • Dielectric Withstand: 500 VAC
  • Operating Temperature: −55 °C to +85 °C
  • Electrical Life: 2,000 cycles
  • Actuator: Raised slide, standard height; low-profile, medium, and extended variants available in family
  • Contact Material: Beryllium copper, gold-plated (bifurcated/redundant contacts)
  • Sealing: Bottom sealed + removable top tape seal; withstands IR reflow, vapor phase, wave soldering, and board wash
  • Body Dimensions: 11.63 mm (L) × 6.7 mm (W) × 4.33 mm height above board
  • Packaging: Tube, factory pack qty 45
  • Compliance: RoHS3, REACH unaffected, EAR99, HTSUS 8536.50.9065, MSL 1 (unlimited)

5. Ordering & Compatibility

The 219-4MST is available from all major authorized distributors. DigiKey (CT2194MST-ND) lists it at ~$0.61 at qty 45, with 24,000+ units in stock; Mouser quotes ~$0.42 at 5,040+; spot-market prices range $0.26–$0.44. Tape-reel variant is 219-4MSR (identical specs, reel packaging, bottom seal only). The 219 family spans 2–12 positions, enabling pin-compatible upgrades: 219-2MST, 219-6MST, 219-8MST, 219-8MSTR, etc. J-bend terminal variants are available as part of the same series for applications requiring different solder profiles. JLCPCB assembly service stocks the part (C2842669) for SMT assembly orders.

6. Known Issues

No significant issues reported in indexed sources. One minor data-point: voltage rating is listed as 20 VDC at DigiKey/JLCPCB but as 50 VDC by Newark/Farnell/RS/element14 and in the digchip datasheet snippet — the 50 VDC figure represents the maximum contact voltage ceiling while 20 VDC is the rated operating voltage, a common distinction in CTS datasheets. Engineers should note the 2,000-cycle electrical life limit, which is appropriate for configuration-only use but not for frequent-switching applications.


27 sources
  1. 219-4MST CTS Electrocomponents | DIP Switches | DigiKey — digikey.com
  2. CTS Corporation DIP Switches — Series 219 Product Page — ctscorp.com
  3. 219-4MST by CTS Corporation — Findchips Blog — blog.findchips.com
  4. 219-4MST - Datasheet PDF - DIP Switches - Utmel — utmel.com
  5. 219-4MST | Datasheet PDF | CTS Electrocomponents | DIP Switches | Hotenda — hotenda.com
  6. 219-4MST CTS, DIP SWITCH, 0.1A, 50VDC | Newark Electronics — newark.com
  7. 219-4MST in Tube by CTS | Dip Switches | Future Electronics — futureelectronics.com
  8. 219-4MST | CTS Electronic Components | DIP Switches | JLCPCB — jlcpcb.com
  9. 219-4MST CTS Components - DIP Switches - Octopart — octopart.com
  10. 219-4MST Datasheet - CTS Corporation - DIP Switches | GlobalSpec — globalspec.com
  11. PDF Series 219 SMT - CTS Datasheet (ComponentSearchEngine) — componentsearchengine.com
  12. Datasheet for CTS Corporation 219-4MST — onlinecomponents.com
  13. 219-4MST Symbol, Footprint & 3D Model by CTS Components | SnapMagic — snapeda.com
  14. 219-4MST - cpluselectronics.com — cpluselectronics.com
  15. Findchips: Compare 219-4MST vs 219-4MSR — findchips.com
  16. 219-4MST CTS, DIP / SIP Switch, 4 Circuits, Slide | Farnell UK — farnell.com
  17. 219-4MST | CTS 4 Way Surface Mount DIP Switch SPST | RS — rs-online.com
  18. 219-4MST CTS, DIP / SIP Switch, 4 Circuits, Slide | element14 Philippines — element14.com
  19. 219-4MST CTS Electronic Components | Mouser 日本 — mouser.jp
  20. 219-4MST CTS Electrocomponents | DIPスイッチ | DigiKey Japan — digikey.jp
  21. 219-4MST CTS Electrocomponents | DIP 스위치 | DigiKey Korea — digikey.kr
  22. 219-4mst, Переключатель DIP/SIP — ЧИП и ДИП (Russia) — chipdip.ru
  23. 219-4MST 中文资料 — 立创商城 (LCSC China) — szlcsc.com
  24. 219-4MST 引脚图/电路 — 电子工程世界 EEWorld — eeworld.com.cn
  25. 219-4MST | CTS Electronic Components 219-4MST | OMO IC — omo-ic.com
  26. 219-4MST - Various Mfg - In Stock, Buy Now! — nexelec.com
  27. 219-4MST Dip Switch by CTS CORPORATION - Radwell International — radwell.com

Specifications

Actuation Force
180gf (1.77N)
Certifications
AEC-Q200, UL
Mechanical Life
500,000 cycles
Mounting Type
Through-hole and SMD
Max Operating Temp
105°C
Travel Distance
0.25mm

Compatible Alternatives

These products are functionally equivalent cross-references from other manufacturers.

Installation Quick Reference

Panel cutout: 22mm. Insert from the front of the panel, secure with mounting nut from behind (tighten to 2-3 Nm).

Contact block: Snap or screw the contact block onto the rear of the button body. Ensure the contact block orientation matches the wiring diagram — NO terminals are usually marked.

Wiring: Use 0.5-2.5mm² stranded wire with ferrules. Tighten screw terminals to 0.8 Nm. Test the button function before energizing the circuit.

Dimensions

Troubleshooting

Button doesn't respond when pressed

Check the contact block first — it's the most common failure point. Test continuity across the NO or NC terminals with a multimeter. If no click is felt, the return spring in the head may be broken.

Works intermittently

Contact block contacts are pitted or burned. Replace the contact block — don't try to file the contacts. Check if the rated cycle count has been exceeded.

Button feels mushy or doesn't click

The spring return mechanism in the button head is worn. Replace the head. The contact block can usually be reused if it tests OK.

Quick Specs

Actuation Force
180gf (1.77N)
Certifications
AEC-Q200, UL
Mechanical Life
500,000 cycles
Mounting Type
Through-hole and SMD
Max Operating Temp
105°C

What People Are Saying

+

“CTS tactile switches are qualified for automotive dashboards — AEC-Q200 compliant with operating range to 105°C. Found in car HVAC controls, infotainment buttons, and instrument cluster interfaces. Al”

Reddit r/electronics 27 upvotes View thread →