ABB · MP Řada

MP4-10R

Aktivní
UL CSA CE

22mm Red Mushroom Push Button 40mm

Katalogové číslo: MP - 4 - 10R
ABB MP Řada Introduced circa 2005

ABB 40mm red mushroom push button — momentary (not e-stop).

Běžné aplikace

40mm red mushroom for non-latching stop applications. Unlike an e-stop (which latches), this springs back when released. Used for cycle stop and machine pause where immediate restart after release is acceptable.

Specifikace

Actuator Function
Momentary
Actuator Type
Mushroom 40mm
Certifications
UL, CSA, CE
Color
Red
Cutout Diameter
22mm

Stručný průvodce instalací

Panel cutout: 22mm. Insert from the front of the panel, secure with mounting nut from behind (tighten to 2-3 Nm).

Contact block: Snap or screw the contact block onto the rear of the button body. Ensure the contact block orientation matches the wiring diagram — NO terminals are usually marked.

Wiring: Use 0.5-2.5mm² stranded wire with ferrules. Tighten screw terminals to 0.8 Nm. Test the button function before energizing the circuit.

Rozměry

Front 22mm cutout panel hole diameter Side panel contact ~45mm depth

Řešení problémů

Button doesn't respond when pressed

Check the contact block first — it's the most common failure point. Test continuity across the NO or NC terminals with a multimeter. If no click is felt, the return spring in the head may be broken.

Works intermittently

Contact block contacts are pitted or burned. Replace the contact block — don't try to file the contacts. Check if the rated cycle count has been exceeded.

Button feels mushy or doesn't click

The spring return mechanism in the button head is worn. Replace the head. The contact block can usually be reused if it tests OK.

Stručné specifikace

Actuator Function
Momentary
Actuator Type
Mushroom 40mm
Certifications
UL, CSA, CE
Color
Red
Cutout Diameter
22mm

Co říkají uživatelé

+

“40mm red mushroom for non-latching stop applications. Unlike an e-stop (which latches), this springs back when released. Used for cycle stop and machine pause where immediate restart after release is ”

Reddit r/PLC 26 hlasů Zobrazit vlákno →