3SU1801-0AB00-2AB1
ActiveSiemens SIRIUS ACT 3SU1 1-Button Green I Control Station (3SU1801-0AB00-2AB1)
Siemens SIRIUS ACT enclosed 2-button start/stop station.
Common Applications
Green start + red stop in an IP67 enclosure. Metal front ring buttons inside. TIA Portal configurable when connected via AS-Interface. The premium enclosed station for Siemens-controlled plants.
Research Notes
1. Overview
The Siemens 3SU1801-0AB00-2AB1 is a pre-assembled 1-button control station from the SIRIUS ACT 3SU1 22 mm line — a plastic enclosure with one green pushbutton labeled "I" (start/on) and a 1 NC contact, rated IP66/IP67/IP69. It's a ready-to-mount surface station for a single control function. (Data-quality note: this was cataloged as a "2-Button Start/Stop Station (Green + Red, 1 NO + 1 NC)" — per Siemens/RS it is a single green "I" button with 1 NC, not a two-button green/red start-stop station.)
2. User Sentiment
SIRIUS ACT enclosed stations are valued for quick installation (no panel cutout) and Siemens' current modular 3SU1 ecosystem (interchangeable operators, contacts, LED modules). A single-button green "I" station is a simple, compact control point. Considerations: confirm the exact button count, color/label, and contact from the full order number — as here, the configuration is easy to mis-state.
3. Real-World Applications
A single green "I" (start/on) control point mounted on a machine, wall, or frame without a panel cutout — e.g. a start or on command wired through the 1 NC (or a simple function button).
4. Technical Specifications
- Type: SIRIUS ACT 3SU1 1-button enclosed control station (surface-mount)
- Operator: one green pushbutton, "I" label (start/on), 22 mm
- Contacts: 1 NC
- Enclosure: plastic; IP66 / IP67 / IP69
- Approvals: UL, CSA, CE
- Line: Siemens SIRIUS ACT 3SU1 (current 22 mm range)
5. Ordering & Compatibility
Complete assembled 1-button station. For 2-button start/stop or other configurations, Siemens offers different 3SU180x order numbers — don't assume this single-green-button code is a start/stop pair. Uses standard SIRIUS ACT 3SU1 operators/contacts/holders for service. Empty 3SU1 enclosures exist separately for custom builds.
6. Known Issues / DQ
- DQ: it's a 1-button green "I" station with 1 NC — not a 2-button green/red start/stop with 1 NO + 1 NC. Corrected here (button count / color / contact).
- Practical care: verify the exact configuration from the full order number, and pick the correct 3SU180x code if a genuine 2-button start/stop station is needed.
2 sources
About the SIRIUS ACT (3SU1) range
Applies to every part of the range, not only the 3SU1801-0AB00-2AB1.
What the range is
SIRIUS ACT (3SU1) is Siemens' modular range of 22 mm pushbuttons, selector switches, key switches, emergency stops and indicator lights. It comes in three design lines:
- 3SU1.0: plastic front ring, black, 22 mm
- 3SU1.5: shiny metal, 22 mm
- 3SU1.6: matte metal with a flat front, 30 mm
From October 2017 it replaced the older 3SB3, 3SB1 and 3SF5 ranges, which were gone from stock by late 2019. Siemens publishes a conversion list from the old codes (support entry 109756490). The 16 mm 3SB2 is a separate range.
How the article numbers work
Siemens article numbers have the form 3SU1 ●●● – ● ●●●● – ●●●●. Taking 3SU1100-0AB20-1BA0, a red flat pushbutton with 1 NO:
| Position | Meaning | Values |
|---|---|---|
| 1st digit after 3SU1 | device type | 0 actuator or indicator only, 1 complete unit, 2 compact unit, 4 module, 5 holder, 8 enclosure, 9 accessory |
| 2nd | front ring | 0 plastic black, 5 metal shiny, 6 metal matte |
| 3rd | illumination | 0 non-illuminated, 1 illuminated |
| after the dash | actuator type | 0 pushbutton, 1 mushroom / E-stop, 2 selector switch, 3 twin / toggle, 4–5 key switch, 6 indicator light or buzzer, 7 coordinate switch |
| letters | design and function | e.g. A flat, B momentary |
| two digits | colour | 00 amber, 10 black, 20 red, 30 yellow, 40 green, 50 blue, 60 white, 70 clear |
| last block | connection and contacts | 1 screw / 3 spring-loaded terminals; then e.g. A no contact, B 1 NO, C 1 NC; marking (A none, C "I", D "O"); last digit 2 = ATEX |
The most common mistake: an actuator alone (3SU10…, 3SU15…, 3SU16…, ending -0AA0) has no holder and no contacts. To make it work you add a holder (3SU1500-0AA10-0AA0 plastic, 3SU1510-0AA10-0AA0 metal, 3SU1550-0AA10-0AA0 universal) and contact modules. A complete unit (3SU11…) includes both.
Selector switches
Function letters (short handle B, long handle C), on actuators and on complete units:
- BF: 2 positions, latching 90°
- BC: 2 positions, spring return from centre to left
- BL: 3 positions, latching 2 × 45°
- BM: 3 positions, spring return from both sides to centre
- BP / BN: spring return from the left, latching right / latching left, return from the right
- GL: 3 positions latching, lockable with padlocks
For example, 3SU1052-2BL10-0AA0 is a shiny metal 3-position latching selector actuator; it needs a holder and contacts.
Contact modules (front-plate mounting)
| Module | Contacts |
|---|---|
| 3SU1400-1AA10-1BA0 | 1 NO |
| 3SU1400-1AA10-1CA0 | 1 NC (positively driven) |
| 3SU1400-1AA10-1DA0 | 2 NO |
| 3SU1400-1AA10-1EA0 | 2 NC |
| 3SU1400-1AA10-1FA0 | 1 NO + 1 NC |
| 3SU1400-1AA10-1HA0 | 1 NC with installation supervision (for E-stops: opens if the module comes off the holder) |
In these codes, -3… instead of -1… means spring-loaded terminals. Ratings: 10 A thermal; AC-15 6 A at 24–230 V and 3 A at 400 V; DC-13 3 A at 24 V and 0.7 A at 110 V. Mechanical life is 10 million operations. The contacts are slow-action, reliable down to 5 V / 1 mA, and suitable for PLC inputs.
Ratings for the range (Siemens catalogue IC 10, 2026)
- IP66, IP67, IP69 (IP69K) for most actuators (quadruple pushbuttons IP65/IP66)
- Operating temperature −25 to +70 °C (storage −40 to +80 °C). Schneider's Harmony is rated to −40 °C.
- Mechanical life: momentary pushbuttons 10 million operations, latching pushbuttons 500,000, selector switches 1 million, E-stops 300,000
- Shock 15 g; vibration 5 g (10–500 Hz); standards IEC 60947-1 and IEC 60947-5-1 (IEC 60947-5-5 for E-stops)
Installing
Hole 22.3 mm (+0.4 mm; Siemens calls the size 22.5 mm), panel 1–6 mm, with holes at least 30 mm apart side by side and 40 mm one above the other when using 3-position holders (40 × 40 mm with 4-position holders). The holder clips on from behind and is clamped by one screw at the top, tightened with a size 2 screwdriver to 1.0–1.2 N·m; no special tool is needed. Holders come preset for a panel of about 4.5 mm, so adjust the screw first on a thicker panel. Label holders and protective caps reduce the allowed panel thickness. Metal holders on a metal panel ground the actuator through the screw tip.
Buying notes
- Check that you are buying a complete unit (3SU11…/3SU115…) and not just the actuator, unless you have holders and contact modules.
- Colour comes from the code: …0AB20… is red and …0AB60… is white. Shops sometimes mis-decode it; trust the two digits before the last dash.
- Older 3SB3 parts are discontinued. Use Siemens' conversion list to find the 3SU1 replacement; it usually needs a holder and contact module as well.
- Problems in use: we found no recurring failure pattern in the sources we could read.
5 sources
- Catalog IC 10 · 2026, chapter 13: Commanding and signaling devices (SIRIUS ACT) — Siemens
- System Manual SIRIUS ACT 3SU1 pushbuttons and signaling devices — Siemens
- Conversion list for the phase-out of 3SB3/3SB1/3SF5 to SIRIUS ACT (3SU1) — Siemens Industry Support
- SIRIUS 3SB3/3SB1/3SF5 phase-out (began October 2017) — Siemens Industry Mall
- SIRIUS ACT - Performance in Action (3SB3 not available after October 2019) — Siemens / RS
Specifications
|
Certifications
Third-party safety certifications. UL = required for US NEC installations. CE = EU compliance. CSA = Canadian standards.
|
UL, CSA, CE
|
|
Color
Button/actuator color. Green = start/go, Red = stop/emergency, Yellow = caution, Blue = reset (per IEC 60204-1).
|
Green (single I button)
|
|
Contact Configuration
Normally Closed — circuit is on until you press. Standard for stop/emergency functions. Wire in series with safety circuits.
|
1NC
|
|
IP Rating
IP69K: Dust-tight and withstands high-pressure, high-temperature steam jets. Built for food processing washdown environments.
|
IP66 / IP67 / IP69
|
|
Mounting Type
How the button attaches to the panel. Panel mount is standard — installs through a cutout from the front.
|
Surface mount (enclosed)
|
|
Operators
|
1x green pushbutton, I (start/on) label
|
|
Pn note
|
Corrected: 3SU1801-0AB00-2AB1 = SINGLE green I pushbutton station, 1NC (Siemens/RS). Was mislabeled 2-button green/red start/stop with 1NO+1NC.
|
|
Pn status
|
mislabel-corrected
|
|
Series
The manufacturer's product family. Products in the same series share mounting systems and accessories.
|
Siemens SIRIUS ACT 3SU1 (current 22mm)
|
Installation Quick Reference
Panel cutout: 22mm. Insert from the front of the panel, secure with mounting nut from behind (tighten to 2-3 Nm).
Contact block: Snap or screw the contact block onto the rear of the button body. Ensure the contact block orientation matches the wiring diagram — NO terminals are usually marked.
Wiring: Use 0.5-2.5mm² stranded wire with ferrules. Tighten screw terminals to 0.8 Nm. Test the button function before energizing the circuit.
Dimensions
Wiring Diagram
Troubleshooting
Button doesn't respond when pressed
Check the contact block first — it's the most common failure point. Test continuity across the NO or NC terminals with a multimeter. If no click is felt, the return spring in the head may be broken.
Works intermittently
Contact block contacts are pitted or burned. Replace the contact block — don't try to file the contacts. Check if the rated cycle count has been exceeded.
Button feels mushy or doesn't click
The spring return mechanism in the button head is worn. Replace the head. The contact block can usually be reused if it tests OK.
Where to Buy
Price range
$84.76 — $126.74
across 2 sellers in US dollars
Quick Specs
- Certifications
- UL, CSA, CE
- Color
- Green (single I button)
- Contact Configuration
- 1NC
- IP Rating
- IP66 / IP67 / IP69
- Mounting Type
- Surface mount (enclosed)
What People Are Saying
“Green start + red stop in an IP67 enclosure. Metal front ring buttons inside. TIA Portal configurable when connected via AS-Interface. The premium enclosed station for Siemens-controlled plants.”