Emergency Stop Switches / E-Stop Switches Enclosure Box Emergency-Stop
Research Notes
1. What this is
FB1W-HW1B-V410R is an IDEC FB-series protective guard / full-cover accessory fitted over a 22mm HW/XW/XN operator (the trailing HW1B/HW4B/XW1E token names the operator it protects). This specific variant is Red.
2. Part-number decode
- Series: IDEC FB — 22mm guard/cover
- Color: Red
3. Compatibility & ordering
Panel cutout: 22mm. Unibody construction — the operator and contact are a single assembly. Cross-reference by size, operation, contact arrangement, and color to an equivalent from another IEC command-switch line (Schneider Harmony, Allen-Bradley 800F/800T, Siemens 3SU, Eaton M22) if IDEC is unavailable.
4. Data-quality note
The series is identified, but one or more code segments (exact operator/contact config) are not fully determinable from the part number alone — treat those as indicative and confirm against IDEC's datasheet for a critical order.
5. Sources
- IDEC FB-series datasheet / ordering guide (idec.com)
- IDEC USA catalog: https://us.idec.com (search the exact part number)
1 source
- IDEC USA catalog — FB1W-HW1B-V410R — us.idec.com
Specifications
|
Color
Button/actuator color. Green = start/go, Red = stop/emergency, Yellow = caution, Blue = reset (per IEC 60204-1).
|
Red
|
|
Device class
|
guard/cover
|
|
Enriched by
|
idec-decoder-2026-08-12
|
|
Lead time
|
0 Days
|
|
Manufacturer series
|
FB
|
|
Modular
|
false
|
|
Mouser part number
|
199-FB1WHW1BV410R
|
|
Panel cutout
|
22mm
|
|
Pn status
|
decoded-partial
|
|
Rohs status
|
|
|
Series description
|
IDEC FB-series protective guard / full-cover accessory fitted over a 22mm HW/XW/XN operator (the trailing HW1B/HW4B/XW1E token names the operator it protects)
|
Installation Quick Reference
Panel cutout: 22mm. Insert from the front of the panel, secure with mounting nut from behind (tighten to 2-3 Nm).
Contact block: Snap or screw the contact block onto the rear of the button body. Ensure the contact block orientation matches the wiring diagram — NO terminals are usually marked.
Wiring: Use 0.5-2.5mm² stranded wire with ferrules. Tighten screw terminals to 0.8 Nm. Test the button function before energizing the circuit.
Dimensions
Troubleshooting
Button doesn't respond when pressed
Check the contact block first — it's the most common failure point. Test continuity across the NO or NC terminals with a multimeter. If no click is felt, the return spring in the head may be broken.
Works intermittently
Contact block contacts are pitted or burned. Replace the contact block — don't try to file the contacts. Check if the rated cycle count has been exceeded.
Button feels mushy or doesn't click
The spring return mechanism in the button head is worn. Replace the head. The contact block can usually be reused if it tests OK.
Quick Specs
- Color
- Red
- Device class
- guard/cover
- Enriched by
- idec-decoder-2026-08-12
- Lead time
- 0 Days
- Manufacturer series
- FB