3SU1132-0AB30-1BA0
نشطSIRIUS ACT Yellow Illuminated Flush 24V
Siemens SIRIUS ACT illuminated yellow flush.
التطبيقات الشائعة
Yellow illuminated for caution/warning. Metal front ring. Completes the Siemens illuminated range.
Research Notes
1. Overview
The catalog stored this SKU as 3SU1132-0AB30-1BA1 — invalid (no genuine SIRIUS ACT suffix ends in "1"; per sibling #335, every valid complete-device suffix in Siemens' System Manual ends in "0"). The corrected part, 3SU1132-0AB30-1BA0, is confirmed live at Farnell (dp/3467781): "Pushbutton Switch, 3SU1 Series, 22 mm, SPST-NO, Momentary, Round, Flat, Yellow." Same SIRIUS ACT 3SU1 complete-device family as #335 (red): 22mm round, plastic + metal front ring, flush, momentary, integral 24V AC/DC LED, 1 NO, screw terminal — only the cap color differs.
2. User Sentiment
No forum/community discussion — a commodity industrial part. Farnell, Kempston Controls, and Electric Automation Network listings are routine, neutral spec-sheet entries.
3. Real-World Applications
Standard 22mm panel pushbutton for machine HMI/control cabinets. Per IEC 60204-1 convention, YELLOW denotes an abnormal-condition/"caution" function (override, bypass, acknowledge) — distinct from red (stop) and green (start). The illuminated cap doubles as an alert indicator.
4. Technical Specifications
- Corrected MLFB: 3SU1132-0AB30-1BA0 (stored "-1BA1" invalid; trailing digit must be "0")
- Color: Yellow — 0AB30 confirmed via Farnell, Kempston (3SU1152 metal variant), Electric Automation Network (3SU1102 plastic variant); consistent with family anchors 0AB20=Red, 0AB40=Green, 0AB50=Blue, 0AB60=White
- Contact: 1 NO (function "B"); Voltage: 24V AC/DC (3SU1132 class)
- Illumination: Yes, integral LED; Actuator: Flush, momentary
- Front ring: Metal; Terminal: Screw; Protection: IP66/IP67 (SIRIUS ACT family rating)
- Stored catalog color "Yellow" is CORRECT — matches 0AB30 authoritatively.
5. Ordering & Compatibility
Genuine, actively distributed part confirmed by Farnell, Kempston Controls (3SU1152-0AB30-1BA0), and Electric Automation Network (3SU1102-0AB30-1BA0), plus Octopart option-variant listings (-ZY10/-ZY13) of the same base MLFB. Compatible with 3SU1400-series plug-in contact modules and 3SU1002 bare holders, same as the rest of the 3SU113x family.
6. Known Issues
Same corruption pattern as siblings #335/#337/#338: trailing digit "1" is invalid (should be "0"). Unlike #335, no contact-field conflict found — no distributor lists a genuine "-1CA0" yellow variant contradicting stored contact type, so this is a clean single-edit fix. Stored color "Yellow" is correct and needs no change.
7 sources
- 3SU1132-0AB30-1BA0 - Pushbutton Switch, 3SU1 Series, 22 mm, SPST-NO, Momentary, Round, Flat, Yellow — Farnell
- 3SU1152-0AB30-1BA0 SIEMENS ILLUMINATED PUSHBUTTON, 22MM, ROUND, METAL, SHINY, YELLOW, FLAT, MOMENTARY — Kempston Controls
- 3SU1102-0AB30-1BA0 SIEMENS Illuminated pushbutton, 22mm, round, plastic, yellow, flat button — Electric Automation Network
- 3SU11320AB301BA0-ZY10 Siemens - Distributors and Price Comparison — Octopart
- 3SU11320AB301BA0-ZY13 Siemens - Distributors and Price Comparison — Octopart
- 3SU1102-0AB30-1BA0 - Industry Mall - Siemens — Siemens Industry Mall
- Siemens Flush Push Button, Yellow, Non-Illum, 22mm 3SU1050-0AB30-0AA0 (confirms 0AB30=yellow across non-illuminated sub-family) — Walmart
المواصفات
|
Certifications
Third-party safety certifications. UL = required for US NEC installations. CE = EU compliance. CSA = Canadian standards.
|
UL, CSA, CE
|
|
Color
Button/actuator color. Green = start/go, Red = stop/emergency, Yellow = caution, Blue = reset (per IEC 60204-1).
|
Yellow
|
|
Contact Configuration
Normally Open — circuit is off until you press. Standard for start/go/enable functions.
|
1NO
|
|
Cutout Diameter
The hole size you drill in your panel to mount this button. 22mm is the most common industrial standard worldwide.
|
22mm
|
|
Illumination
Whether the button has a built-in light. Illuminated buttons show status (lit = active).
|
Illuminated
|
|
IP Rating
IP67: Dust-tight and survives temporary water submersion (1m for 30 min). Handles oil splashes, steam cleaning, and rain.
|
IP67
|
|
LED Voltage
The voltage required for the built-in LED. Must match your control circuit voltage (typically 24V DC or 230V AC).
|
24V AC/DC
|
|
Material
The bezel/body material. Metal bezels are more durable in harsh environments. Plastic is lighter and cheaper.
|
Metal front ring
|
مرجع سريع للتركيب
Panel cutout: 22mm. Insert from the front of the panel, secure with mounting nut from behind (tighten to 2-3 Nm).
Contact block: Snap or screw the contact block onto the rear of the button body. Ensure the contact block orientation matches the wiring diagram — NO terminals are usually marked.
Wiring: Use 0.5-2.5mm² stranded wire with ferrules. Tighten screw terminals to 0.8 Nm. Test the button function before energizing the circuit.
الأبعاد
مخطط التوصيل
استكشاف الأعطال وإصلاحها
Button doesn't respond when pressed
Check the contact block first — it's the most common failure point. Test continuity across the NO or NC terminals with a multimeter. If no click is felt, the return spring in the head may be broken.
Works intermittently
Contact block contacts are pitted or burned. Replace the contact block — don't try to file the contacts. Check if the rated cycle count has been exceeded.
Button feels mushy or doesn't click
The spring return mechanism in the button head is worn. Replace the head. The contact block can usually be reused if it tests OK.
أين تشتري
نطاق السعر
$89.95 — $109.74
عبر 2 موزع
مواصفات سريعة
- Certifications
- UL, CSA, CE
- Color
- Yellow
- Contact Configuration
- 1NO
- Cutout Diameter
- 22mm
- Illumination
- Illuminated
ما يقوله المستخدمون
“Yellow illuminated for caution/warning. Metal front ring. Completes the Siemens illuminated range.”
