Gateron · KS-3 Pro السلسلة

KS-3-MILKY-R

نشط

Gateron Milky Red Pro Linear 45g

Gateron KS-3 Pro السلسلة Introduced circa 2021

Gateron Milky Red Pro — factory-lubed light linear.

التطبيقات الشائعة

Milky housing with pre-lubed Red internals. 45g actuation. Same milky RGB diffusion as the Yellow. For gaming where the lighter 45g spring is preferred over the 50g Yellow.

المواصفات

Actuation Force
45g
Color
Red stem, milky housing
Mechanical Life
80,000,000 cycles
Travel Distance
2mm actuation, 4mm total

مرجع سريع للتركيب

Panel cutout: 22mm. Insert from the front of the panel, secure with mounting nut from behind (tighten to 2-3 Nm).

Contact block: Snap or screw the contact block onto the rear of the button body. Ensure the contact block orientation matches the wiring diagram — NO terminals are usually marked.

Wiring: Use 0.5-2.5mm² stranded wire with ferrules. Tighten screw terminals to 0.8 Nm. Test the button function before energizing the circuit.

الأبعاد

استكشاف الأعطال وإصلاحها

Button doesn't respond when pressed

Check the contact block first — it's the most common failure point. Test continuity across the NO or NC terminals with a multimeter. If no click is felt, the return spring in the head may be broken.

Works intermittently

Contact block contacts are pitted or burned. Replace the contact block — don't try to file the contacts. Check if the rated cycle count has been exceeded.

Button feels mushy or doesn't click

The spring return mechanism in the button head is worn. Replace the head. The contact block can usually be reused if it tests OK.

أين تشتري

نطاق السعر

$40.12 — $44.82

عبر 2 موزع

مواصفات سريعة

Actuation Force
45g
Color
Red stem, milky housing
Mechanical Life
80,000,000 cycles
Travel Distance
2mm actuation, 4mm total

ما يقوله المستخدمون

+

“Milky housing with pre-lubed Red internals. 45g actuation. Same milky RGB diffusion as the Yellow. For gaming where the lighter 45g spring is preferred over the 50g Yellow.”

Reddit r/MechanicalKeyboards 35 تصويتات إيجابية عرض الموضوع →