Allen-Bradley · 800F السلسلة

800F-2XA10-A1Y

نشط
UL CSA

800F 2-Button Start/Stop Station Enclosed

Allen-Bradley 800F السلسلة Introduced circa 2005

Allen-Bradley 800F 2-button start/stop control station.

التطبيقات الشائعة

Complete AB start/stop station in NEMA 4 enclosure. For remote motor control on US industrial equipment. Uses standard 800F buttons internally.

المواصفات

Certifications
UL, CSA
Color
Green + Red
Contact Configuration
1NO + 1NC
IP Rating
NEMA 4
Mounting Type
Surface mount (enclosed)

مرجع سريع للتركيب

Panel cutout: 22mm. Insert from the front of the panel, secure with mounting nut from behind (tighten to 2-3 Nm).

Contact block: Snap or screw the contact block onto the rear of the button body. Ensure the contact block orientation matches the wiring diagram — NO terminals are usually marked.

Wiring: Use 0.5-2.5mm² stranded wire with ferrules. Tighten screw terminals to 0.8 Nm. Test the button function before energizing the circuit.

الأبعاد

مخطط التوصيل

11 12 NO 21 22 NC

استكشاف الأعطال وإصلاحها

Button doesn't respond when pressed

Check the contact block first — it's the most common failure point. Test continuity across the NO or NC terminals with a multimeter. If no click is felt, the return spring in the head may be broken.

Works intermittently

Contact block contacts are pitted or burned. Replace the contact block — don't try to file the contacts. Check if the rated cycle count has been exceeded.

Button feels mushy or doesn't click

The spring return mechanism in the button head is worn. Replace the head. The contact block can usually be reused if it tests OK.

أين تشتري

نطاق السعر

$137.42 — $170.58

عبر 2 موزع

مواصفات سريعة

Certifications
UL, CSA
Color
Green + Red
Contact Configuration
1NO + 1NC
IP Rating
NEMA 4
Mounting Type
Surface mount (enclosed)

ما يقوله المستخدمون

+

“Complete AB start/stop station in NEMA 4 enclosure. For remote motor control on US industrial equipment. Uses standard 800F buttons internally.”

Reddit r/PLC 25 تصويتات إيجابية عرض الموضوع →