Introducing our Boutique Collection of Switches - Aqua Zilent These switches were designed with the enthusiasts in mind that value aesthetics, tactility, and silence. Two weights are offered: 62g and 67g bottom out. The color matching possibilities are endless. 62g Aqua Zilent switches feature a lighter toned aqua blue housing, carefully matched with our signature 62g Zilent V2 stem. 67g Aqua Zilent switches feature a darker toned aqua blue housing, carefully matched with our signature 67g Zilent V2 stem. Zilent switches are currently the smoothest, quietest and most tactile MX switch available on the market. Tactile bump starts at the very top. ------------ 1 Order = 10 Switches.
研究笔记
1. What this is
Zeal Aqua Zilent® V2 Switches (Silent Tactile) is a mechanical keyboard switch from Zeal. It is tactile, silent.
2. Spec decode (from product name)
- Switch type: tactile
- Silent: yes (dampened)
3. Compatibility & use
Standard MX-style keyboard switch. Choose by feel (linear/tactile/clicky), actuation force, and sound (silent vs standard); 5-pin PCB-mount switches also fit plate-mount boards. Hot-swap or solder depending on your board.
4. Data-quality note
The switch type is decoded from the name; the exact actuation force and mount should be confirmed against the manufacturer's spec. Flagged decoded-partial. (Note: some of these rows are catalogued under a generic push-button/arcade-button category in the source data; the correct device class is keyboard switch, recorded in the specs above.)
5. Sources
- Zeal product page / keyboard-switch community databases
- Distributor / vendor listing — search the exact switch name
来源
- Zeal Aqua Zilent® V2 Switches (Silent Tactile) — keyboard-switch spec
规格参数
|
Device class
|
mechanical keyboard switch
|
|
Enriched by
|
keyboard-decoder-2026-08-12
|
|
Pn status
|
decoded-partial
|
|
Product type
|
Accessories
|
|
Series description
|
Zeal mechanical keyboard switch (tactile, silent)
|
|
Shopify id
|
2000040132671
|
|
Silent
|
true
|
|
Switch type
|
tactile
|
|
Vendor
|
Zeal Generation Inc.
|
安装快速参考
Panel cutout: 22mm. Insert from the front of the panel, secure with mounting nut from behind (tighten to 2-3 Nm).
Contact block: Snap or screw the contact block onto the rear of the button body. Ensure the contact block orientation matches the wiring diagram — NO terminals are usually marked.
Wiring: Use 0.5-2.5mm² stranded wire with ferrules. Tighten screw terminals to 0.8 Nm. Test the button function before energizing the circuit.
尺寸
故障排除
Button doesn't respond when pressed
Check the contact block first — it's the most common failure point. Test continuity across the NO or NC terminals with a multimeter. If no click is felt, the return spring in the head may be broken.
Works intermittently
Contact block contacts are pitted or burned. Replace the contact block — don't try to file the contacts. Check if the rated cycle count has been exceeded.
Button feels mushy or doesn't click
The spring return mechanism in the button head is worn. Replace the head. The contact block can usually be reused if it tests OK.
快速规格
- Device class
- mechanical keyboard switch
- Enriched by
- keyboard-decoder-2026-08-12
- Pn status
- decoded-partial
- Product type
- Accessories
- Series description
- Zeal mechanical keyboard switch (tactile, silent)
