101111

在产

Soldered 101111

Soldered 101111 — Soldered 101111

Pushbutton Switches Small pushbutton, breadboard

研究笔记

1. What this is

101111 ("Soldered 101111") is catalogued as a smart-home control device (button / switch / remote / knob) from Soldered.

2. What we know

  • Manufacturer: Soldered
  • Category: smart-home control device (button / switch / remote / knob)
  • Part number / name: 101111 — Soldered 101111
  • Soldered makes smart-home / IoT devices (typically Zigbee, Matter, or Wi-Fi). This entry is a smart-home control device (button / switch / remote / knob); the product name describes its function.

3. How to identify / order the exact part

The full specifications for this part are not machine-decodable from the data we hold. To confirm the exact configuration (contacts, rating, colour, mounting, protocol), search the Soldered catalog for this part number on the manufacturer site or a distributor (DigiKey / Mouser / RS). For smart-home devices, confirm the wireless protocol (Zigbee / Matter / Wi-Fi / Thread) and hub compatibility.

4. Data-quality note

This page is generated from the catalogued manufacturer, category, and product name. Per our keep-and-document policy we publish a page for every part we hold and state plainly what is known versus what needs verification, rather than deleting the row or inventing specs. Flagged needs-verification.

5. Sources

  • Soldered product catalog — search "101111" / "Soldered 101111"

来源
  1. Soldered 101111 — distributor/catalog

规格参数

Device class
push-button
Enriched by
generic-fallback-2026-08-12
Lead time
27 Days
Mouser part number
392-101111
Pn status
needs-verification
Rohs status
RoHS Compliant

安装快速参考

Panel cutout: 22mm. Insert from the front of the panel, secure with mounting nut from behind (tighten to 2-3 Nm).

Contact block: Snap or screw the contact block onto the rear of the button body. Ensure the contact block orientation matches the wiring diagram — NO terminals are usually marked.

Wiring: Use 0.5-2.5mm² stranded wire with ferrules. Tighten screw terminals to 0.8 Nm. Test the button function before energizing the circuit.

尺寸

故障排除

Button doesn't respond when pressed

Check the contact block first — it's the most common failure point. Test continuity across the NO or NC terminals with a multimeter. If no click is felt, the return spring in the head may be broken.

Works intermittently

Contact block contacts are pitted or burned. Replace the contact block — don't try to file the contacts. Check if the rated cycle count has been exceeded.

Button feels mushy or doesn't click

The spring return mechanism in the button head is worn. Replace the head. The contact block can usually be reused if it tests OK.

照片与图纸

图片:mouser.com

快速规格

Device class
push-button
Enriched by
generic-fallback-2026-08-12
Lead time
27 Days
Mouser part number
392-101111
Pn status
needs-verification

更多 Soldered 产品