3SU18510NA002AC2

在产

Siemens 3SU18510NA002AC2

零件编号: 3SU1
Siemens 3SU18510NA002AC2 — Siemens 3SU18510NA002AC2

Emergency Stop Switches / E-Stop Switches ENC METAL, EMERG STOP TWIST-RELEASE,1NC

研究笔记

1. What this is

3SU18510NA002AC2 is a Siemens device — series not recognized.

2. Part-number decode

  • Series: Siemens (series not recognized)

3. Compatibility & ordering

Siemens command switches are modular IEC-style panel devices. Match by size, function (pushbutton/selector/indicator/E-stop), color, illumination, and contact blocks; cross-reference to Schneider Harmony, Allen-Bradley 800F, IDEC HW, or Eaton M22 by the same attributes if needed.

4. Data-quality note

The exact Siemens series/configuration could not be confidently decoded from this part number. Kept and documented; flagged needs-verification.

5. Sources

  • Siemens LV1 catalog / SIRIUS ACT (3SU) & Class 52 selection data (siemens.com)
  • Siemens Industry Mall — search the exact part/material number
  • Distributor listing (Mouser / Newark) — search the exact part number

来源
  1. Siemens Industry Mall — 3SU18510NA002AC2 — siemens.com
关于SIRIUS ACT (3SU1)系列

适用于整个系列的所有部件,而不仅仅是3SU18510NA002AC2。

产品系列概述

SIRIUS ACT (3SU1) 是西门子模块化的 22 mm 按钮、选择开关、钥匙开关、急停按钮和指示灯系列。它分为三种设计系列:

  • 3SU1.0: 塑料前环,黑色,22 mm
  • 3SU1.5: 亮面金属,22 mm
  • 3SU1.6: 哑光金属,平面前端,30 mm

自 2017 年 10 月起,它取代了旧的 3SB3、3SB1 和 3SF5 系列,这些旧系列在 2019 年底已无库存。西门子发布了旧代码的转换列表(支持条目 109756490)。16 mm 的 3SB2 是一个独立系列。

产品编号解析

西门子产品编号的格式为 3SU1 ●●● – ● ●●●● – ●●●●。以 3SU1100-0AB20-1BA0 为例,这是一个红色平头按钮,带 1 个 NO 触点:

位置含义值
3SU1 后的第 1 位设备类型0 仅执行器或指示灯,1 完整单元,2 紧凑单元,4 模块,5 支架,8 外壳,9 附件
第 2 位前环0 黑色塑料,5 亮面金属,6 哑光金属
第 3 位照明0 无照明,1 带照明
破折号后执行器类型0 按钮,1 蘑菇头/急停按钮,2 选择开关,3 双位/拨动开关,4–5 钥匙开关,6 指示灯或蜂鸣器,7 坐标开关
字母设计和功能例如 A 平头,B 瞬时
两位数颜色00 琥珀色,10 黑色,20 红色,30 黄色,40 绿色,50 蓝色,60 白色,70 透明
最后一段连接和触点1 螺钉/3 弹簧端子;例如 A 无触点,B 1 NO,C 1 NC;标记(A 无,C "I",D "O");最后一位 2 = ATEX

最常见的错误:单独的执行器(3SU10…、3SU15…、3SU16…,以 -0AA0 结尾)没有支架和触点。要使它工作,您需要添加支架(3SU1500-0AA10-0AA0 塑料,3SU1510-0AA10-0AA0 金属,3SU1550-0AA10-0AA0 通用)和触点模块。完整单元(3SU11…)包含两者。

选择开关

功能字母(短手柄 B,长手柄 C),适用于执行器和完整单元:

  • BF: 2 位,锁定 90°
  • BC: 2 位,从中心向左弹簧返回
  • BL: 3 位,锁定 2 × 45°
  • BM: 3 位,从两侧向中心弹簧返回
  • BP / BN: 从左弹簧返回,锁定右 / 锁定左,从右返回
  • GL: 3 位锁定,可挂锁锁定

例如,3SU1052-2BL10-0AA0 是一个亮面金属 3 位锁定选择执行器;它需要支架和触点。

触点模块(前面板安装)

模块触点
3SU1400-1AA10-1BA01 NO
3SU1400-1AA10-1CA01 NC(正驱动)
3SU1400-1AA10-1DA02 NO
3SU1400-1AA10-1EA02 NC
3SU1400-1AA10-1FA01 NO + 1 NC
3SU1400-1AA10-1HA01 NC 带安装监控(用于急停按钮:如果模块从支架上脱落,触点打开)

在这些代码中,-3… 代替 -1… 表示弹簧端子。额定值:10 A 热电流;AC-15 24–230 V 时 6 A,400 V 时 3 A;DC-13 24 V 时 3 A,110 V 时 0.7 A。机械寿命为 1000 万次操作。触点为慢动作,可靠低至 5 V / 1 mA,适用于 PLC 输入。

系列额定值(西门子目录 IC 10,2026)

  • IP66、IP67、IP69(IP69K)适用于大多数执行器(四联按钮 IP65/IP66)
  • 工作温度 −25 至 +70 °C(储存温度 −40 至 +80 °C)。施耐德的 Harmony 系列额定温度为 −40 °C。
  • 机械寿命:瞬时按钮 1000 万次操作,锁定按钮 50 万次,选择开关 100 万次,急停按钮 30 万次
  • 冲击 15 g;振动 5 g(10–500 Hz);标准 IEC 60947-1 和 IEC 60947-5-1(急停按钮为 IEC 60947-5-5)

安装

孔径 22.3 mm(+0.4 mm;西门子称为 22.5 mm),面板厚度 1–6 mm,使用 3 位支架时,相邻孔距至少 30 mm,上下孔距至少 40 mm(使用 4 位支架时为 40 × 40 mm)。支架从后面卡入,并通过顶部的一个螺钉固定,使用 2 号螺丝刀拧紧至 1.0–1.2 N·m;无需特殊工具。支架预设用于约 4.5 mm 的面板,因此在较厚的面板上先调整螺钉。标签支架和保护帽会减少允许的面板厚度。金属支架在金属面板上通过螺钉尖端接地执行器。

购买注意事项

  • 确认您购买的是完整单元(3SU11…/3SU115…),而不是仅执行器,除非您已有支架和触点模块。
  • 颜色来自代码:…0AB20… 是红色,…0AB60… 是白色。商店有时会误解码;请信任破折号前的两位数。
  • 旧的 3SB3 部件已停产。使用西门子的转换列表找到 3SU1 替代品;通常还需要支架和触点模块。
  • 使用中的问题:在我们可查阅的资料中,未发现重复的故障模式。
来源
  1. Catalog IC 10 · 2026, chapter 13: Commanding and signaling devices (SIRIUS ACT) — Siemens
  2. System Manual SIRIUS ACT 3SU1 pushbuttons and signaling devices — Siemens
  3. Conversion list for the phase-out of 3SB3/3SB1/3SF5 to SIRIUS ACT (3SU1) — Siemens Industry Support
  4. SIRIUS 3SB3/3SB1/3SF5 phase-out (began October 2017) — Siemens Industry Mall
  5. SIRIUS ACT - Performance in Action (3SB3 not available after October 2019) — Siemens / RS

规格参数

Enriched by
siemens-decoder-2026-08-12
Lead time
21 Days
Manufacturer series
Siemens (series not recognized)
Mouser part number
982-3SU18510NA002AC2
Pn status
needs-verification
Rohs status
RoHS Compliant
Series description
Siemens control/switch device — exact series/config could not be decoded from this part number; kept and flagged for verification rather than guessed

安装快速参考

Panel cutout: 22mm. Mount with the yellow backing plate visible (required by EN/ISO 13850).

Wiring: Wire NC contacts in series with the safety relay input channels. Use dual-channel wiring for SIL 3 / PLe applications. Never wire directly to a motor contactor.

Testing: Press the e-stop and verify the machine stops within the required time. Test the reset mechanism. Repeat monthly per EN/ISO 13850.

尺寸

故障排除

E-stop won't reset (twist/pull doesn't release)

Check for debris in the mechanism. For twist-release: turn clockwise 45-90 degrees. For push-pull: pull straight out firmly. If the mechanism is stuck, the internal latch may be damaged — replace the entire head assembly.

Machine doesn't stop when e-stop is pressed

Critical safety issue. Immediately lock out the machine. Check wiring — NC contacts must be in series with the safety relay. Verify the safety relay is functioning. A broken wire in an NC circuit should cause a stop, so check for a wiring bypass.

Safety relay faults after e-stop reset

The safety relay detects a cross-fault between the two monitoring channels. Check that both NC contacts on the e-stop are switching simultaneously. One contact may be welded closed — replace the contact block.

照片与图纸

图片:mouser.com

快速规格

Enriched by
siemens-decoder-2026-08-12
Lead time
21 Days
Manufacturer series
Siemens (series not recognized)
Mouser part number
982-3SU18510NA002AC2
Pn status
needs-verification