ZA2BS944
在产Schneider Electric ZA2BS944
Emergency Stop Switches / E-Stop Switches MUSHROOM/40MM RED T-T-R
Research Notes
1. What this is
ZA2BS944 is a Schneider Electric Harmony ZA2 (older generation) 22mm modular component (operator head / contact block).
2. Part-number decode
- Series: Harmony ZA2
- Panel cutout: 22mm
- Type: head/block (modular)
3. Compatibility & ordering
Schneider's Harmony (22/16mm) and Square D Class 9001 (30mm) are the reference IEC/US command-switch ranges. This is a modular component — a Harmony/9001 device is assembled from an operator head + mounting collar + contact/light block(s). Confirm you have the matching head and blocks for a complete device. Match by size (16/22/30mm), bezel material (metal XB4/ZB4 vs plastic XB5/ZB5), function (pushbutton/selector/indicator/E-stop), colour, illumination, and contact arrangement; cross-reference to Allen-Bradley 800F/800T, Siemens 3SU, IDEC HW, or Eaton M22 by the same attributes if needed.
4. Data-quality note
The Schneider series/family is identified; bezel/size are indicative and the exact colour/contact configuration is left to the Schneider datasheet rather than guessed. Flagged decoded-partial.
5. Sources
- Schneider Electric Harmony / Square D Class 9001 catalog (se.com)
- Distributor listing (Rexel / Mouser / Newark) — search the exact part number
1 source
- Schneider Electric — ZA2BS944 — se.com
规格参数
|
Component type
|
head/block (modular)
|
|
Enriched by
|
schneider-decoder-2026-08-12
|
|
Lead time
|
0 Days
|
|
Manufacturer series
|
Harmony ZA2
|
|
Mouser part number
|
996-ZA2BS944
|
|
Panel cutout
|
22mm
|
|
Pn status
|
decoded-partial
|
|
Wireless Range
Maximum wireless range in open air. Walls and interference reduce this significantly.
|
Harmony / Square D Class 9001
|
|
Rohs status
|
|
|
Series description
|
Schneider Harmony ZA2 (older generation) 22mm modular component (operator head / contact block)
|
安装快速参考
Panel cutout: 22mm. Mount with the yellow backing plate visible (required by EN/ISO 13850).
Wiring: Wire NC contacts in series with the safety relay input channels. Use dual-channel wiring for SIL 3 / PLe applications. Never wire directly to a motor contactor.
Testing: Press the e-stop and verify the machine stops within the required time. Test the reset mechanism. Repeat monthly per EN/ISO 13850.
尺寸
故障排除
E-stop won't reset (twist/pull doesn't release)
Check for debris in the mechanism. For twist-release: turn clockwise 45-90 degrees. For push-pull: pull straight out firmly. If the mechanism is stuck, the internal latch may be damaged — replace the entire head assembly.
Machine doesn't stop when e-stop is pressed
Critical safety issue. Immediately lock out the machine. Check wiring — NC contacts must be in series with the safety relay. Verify the safety relay is functioning. A broken wire in an NC circuit should cause a stop, so check for a wiring bypass.
Safety relay faults after e-stop reset
The safety relay detects a cross-fault between the two monitoring channels. Check that both NC contacts on the e-stop are switching simultaneously. One contact may be welded closed — replace the contact block.
快速规格
- Component type
- head/block (modular)
- Enriched by
- schneider-decoder-2026-08-12
- Lead time
- 0 Days
- Manufacturer series
- Harmony ZA2
- Mouser part number
- 996-ZA2BS944
