XB6ECW1B2P

在产

Schneider Electric XB6ECW1B2P

Schneider Electric XB6ECW1B2P — Schneider Electric XB6ECW1B2P

Pushbutton Switches ILL PB SQUARE WH FLUSH SPRGRET 24VDC 2CO

研究笔记

1. What this is

XB6ECW1B2P is a Schneider Electric Harmony XB6 complete 16mm pushbutton (compact panel command switch).

2. Part-number decode

  • Series: Harmony XB6
  • Panel cutout: 16mm
  • Type: complete unit

3. Compatibility & ordering

Schneider's Harmony (22/16mm) and Square D Class 9001 (30mm) are the reference IEC/US command-switch ranges. This is a complete, pre-assembled device (operator + contact block). Match by size (16/22/30mm), bezel material (metal XB4/ZB4 vs plastic XB5/ZB5), function (pushbutton/selector/indicator/E-stop), colour, illumination, and contact arrangement; cross-reference to Allen-Bradley 800F/800T, Siemens 3SU, IDEC HW, or Eaton M22 by the same attributes if needed.

4. Data-quality note

The Schneider series, bezel material, size, and component type are decoded from the part number (grounded in the se.com Harmony catalog and distributor listings). The exact colour and contact arrangement are encoded in the remaining digits and depend on the sub-family — confirm against the Schneider datasheet for a precise order (not guessed here).

5. Sources

  • Schneider Electric Harmony / Square D Class 9001 catalog (se.com)
  • Distributor listing (Rexel / Mouser / Newark) — search the exact part number

来源
  1. Schneider Electric — XB6ECW1B2P — se.com

规格参数

Component type
complete unit
Enriched by
schneider-decoder-2026-08-12
Lead time
39 Days
Manufacturer series
Harmony XB6
Mouser part number
996-XB6ECW1B2P
Panel cutout
16mm
Pn status
decoded
Wireless Range
Harmony / Square D Class 9001
Rohs status
Series description
Schneider Harmony XB6 complete 16mm pushbutton (compact panel command switch)

安装快速参考

Panel cutout: 22mm. Insert from the front of the panel, secure with mounting nut from behind (tighten to 2-3 Nm).

Contact block: Snap or screw the contact block onto the rear of the button body. Ensure the contact block orientation matches the wiring diagram — NO terminals are usually marked.

Wiring: Use 0.5-2.5mm² stranded wire with ferrules. Tighten screw terminals to 0.8 Nm. Test the button function before energizing the circuit.

尺寸

故障排除

Button doesn't respond when pressed

Check the contact block first — it's the most common failure point. Test continuity across the NO or NC terminals with a multimeter. If no click is felt, the return spring in the head may be broken.

Works intermittently

Contact block contacts are pitted or burned. Replace the contact block — don't try to file the contacts. Check if the rated cycle count has been exceeded.

Button feels mushy or doesn't click

The spring return mechanism in the button head is worn. Replace the head. The contact block can usually be reused if it tests OK.

照片与图纸

图片:mouser.com

快速规格

Component type
complete unit
Enriched by
schneider-decoder-2026-08-12
Lead time
39 Days
Manufacturer series
Harmony XB6
Mouser part number
996-XB6ECW1B2P