8VR1PZ-0EN0
在产Ring Video Doorbell Pro 2
Ring Video Doorbell Pro 2 — hardwired premium model with head-to-toe view.
常见应用
The premium hardwired Ring. Connects to existing doorbell wiring — no battery to charge. Head-to-toe 1536p video captures packages on the ground. 3D motion detection with Bird Eye View shows where visitors walked. The button is a polished metal momentary switch. Found on luxury homes and apartment complexes.
开放性与可改装性
Locked to Ring/Amazon. Cannot flash. HA cloud integration available via unofficial API. Button hardware is mechanical, smarts locked in WiFi module.
规格参数
|
Battery Type
The battery used. CR2032 = common coin cell, easy to replace. AAA = higher capacity. USB-C = rechargeable.
|
Hardwired (16-24V AC)
|
|
Color
Button/actuator color. Green = start/go, Red = stop/emergency, Yellow = caution, Blue = reset (per IEC 60204-1).
|
Satin Nickel
|
|
Smart Home Integrations
Compatible smart home platforms and voice assistants.
|
Alexa, Ring App
|
|
IP Rating
Ingress Protection rating — first digit is dust (0-6), second is water (0-9). Higher is better.
|
IPX5
|
|
Mounting Type
How the button attaches to the panel. Panel mount is standard — installs through a cutout from the front.
|
Hardwired to existing doorbell
|
|
Protocol
The wireless communication standard. BLE = short range, phone direct. Zigbee = mesh network, needs hub. Z-Wave = mesh, needs hub. WiFi = direct, higher power.
|
WiFi 2.4/5GHz
|
安装快速参考
Panel cutout: 22mm. Insert from the front of the panel, secure with mounting nut from behind (tighten to 2-3 Nm).
Contact block: Snap or screw the contact block onto the rear of the button body. Ensure the contact block orientation matches the wiring diagram — NO terminals are usually marked.
Wiring: Use 0.5-2.5mm² stranded wire with ferrules. Tighten screw terminals to 0.8 Nm. Test the button function before energizing the circuit.
尺寸
故障排除
Button doesn't respond when pressed
Check the contact block first — it's the most common failure point. Test continuity across the NO or NC terminals with a multimeter. If no click is felt, the return spring in the head may be broken.
Works intermittently
Contact block contacts are pitted or burned. Replace the contact block — don't try to file the contacts. Check if the rated cycle count has been exceeded.
Button feels mushy or doesn't click
The spring return mechanism in the button head is worn. Replace the head. The contact block can usually be reused if it tests OK.
快速规格
- Battery Type
- Hardwired (16-24V AC)
- Color
- Satin Nickel
- Smart Home Integrations
- Alexa, Ring App
- IP Rating
- IPX5
- Mounting Type
- Hardwired to existing doorbell
用户评价
“The premium hardwired Ring. Connects to existing doorbell wiring — no battery to charge. Head-to-toe 1536p video captures packages on the ground. 3D motion detection with Bird Eye View shows where vis”