KP0415ASG03RGBW-MT

在产

NKK Switches KP0415ASG03RGBW-MT

NKK Switches KP0415ASG03RGBW-MT — NKK Switches KP0415ASG03RGBW-MT

系列图片:卖家将其用于5个其他部件,因此可能不显示此确切版本。

Pushbutton Switches MINIATURE AUDIO/VIDEO PUSHBUTTON SMT

研究笔记

1. What this is

KP0415ASG03RGBW-MT is an NKK HP/KP-series keylock or process pushbutton switch.

2. Part-number decode

  • Product line: NKK HP/KP
  • Type: keylock/pushbutton

3. Compatibility & ordering

NKK Switches makes high-quality toggle, rocker, pushbutton, tactile, and programmable SmartSwitch products for panel and PCB mounting. Match by type (toggle/rocker/pushbutton/programmable), actuation (momentary vs alternate), illumination, mounting, and the electrical rating, then use the NKK datasheet to confirm the exact contact form and termination encoded in the part number.

4. Data-quality note

The exact NKK product line/configuration could not be confidently decoded from this part number. Kept and documented; flagged needs-verification.

5. Sources

  • NKK Switches product catalog (nkkswitches.com)
  • Distributor listing (DigiKey / Mouser) — search the exact part number

来源
  1. NKK Switches — KP0415ASG03RGBW-MT — nkkswitches.com

规格参数

Device class
keylock/pushbutton
Enriched by
nkk-decoder-2026-08-12
Lead time
105 Days
Manufacturer series
HP/KP
Mouser part number
633-KP0415ASG03RGWMT
Pn status
needs-verification
Rohs status
RoHS Compliant
Series description
NKK HP/KP-series keylock or process pushbutton switch

安装快速参考

Panel cutout: 22mm. Insert from the front of the panel, secure with mounting nut from behind (tighten to 2-3 Nm).

Contact block: Snap or screw the contact block onto the rear of the button body. Ensure the contact block orientation matches the wiring diagram — NO terminals are usually marked.

Wiring: Use 0.5-2.5mm² stranded wire with ferrules. Tighten screw terminals to 0.8 Nm. Test the button function before energizing the circuit.

尺寸

故障排除

Button doesn't respond when pressed

Check the contact block first — it's the most common failure point. Test continuity across the NO or NC terminals with a multimeter. If no click is felt, the return spring in the head may be broken.

Works intermittently

Contact block contacts are pitted or burned. Replace the contact block — don't try to file the contacts. Check if the rated cycle count has been exceeded.

Button feels mushy or doesn't click

The spring return mechanism in the button head is worn. Replace the head. The contact block can usually be reused if it tests OK.

照片与图纸

图片:mouser.com

快速规格

Device class
keylock/pushbutton
Enriched by
nkk-decoder-2026-08-12
Lead time
105 Days
Manufacturer series
HP/KP
Mouser part number
633-KP0415ASG03RGWMT