1490MD3

在产

Hammond Manufacturing 1490MD3

Hammond Manufacturing 1490MD3 — Hammond Manufacturing 1490MD3

系列图片:卖家将其用于13个其他部件,因此可能不显示此确切版本。

Push-button Enclosures N12 PB Consolet - 3 PB x 22.5mm - 3.50 x 7.75 x 4.88" - Steel/Gray

研究笔记

1. What this is

1490MD3 ("Hammond Manufacturing 1490MD3") is catalogued as a push-button / switch device from Hammond Manufacturing.

2. What we know

  • Manufacturer: Hammond Manufacturing
  • Category: push-button / switch device
  • Part number / name: 1490MD3 — Hammond Manufacturing 1490MD3
  • Hammond Manufacturing — electronics ENCLOSURES, racks, and transformers (a Hammond part is usually an enclosure/box, not a switch)

3. How to identify / order the exact part

The full specifications for this part are not machine-decodable from the data we hold. To confirm the exact configuration (contacts, rating, colour, mounting, protocol), search the Hammond Manufacturing catalog for this part number on the manufacturer site or a distributor (DigiKey / Mouser / RS).

4. Data-quality note

This page is generated from the catalogued manufacturer, category, and product name. Per our keep-and-document policy we publish a page for every part we hold and state plainly what is known versus what needs verification, rather than deleting the row or inventing specs. Flagged needs-verification.

5. Sources

  • Hammond Manufacturing product catalog — search "1490MD3" / "Hammond Manufacturing 1490MD3"

Verified distributor data (Mouser)

This part is carried by Mouser Electronics; the description and datasheet above come straight from the distributor's catalog, confirming and expanding the part-number decode above.


来源
  1. Hammond Manufacturing 1490MD3 — distributor/catalog

规格参数

Datasheet url
https://www.mouser.com/datasheet/3/222/1/1490.pdf
Device class
push-button
Enriched by
generic-fallback-2026-08-12
Lead time
23 Days
Mouser checked
2026-09-28
Mouser description
Push-button Enclosures N12 PB Consolet - 3 PB x 22.5mm - 3.50 x 7.75 x 4.88" - Steel/Gray
Mouser matched
true
Mouser part number
546-1490MD3
Pn status
verified
Rohs status
RoHS Compliant

安装快速参考

Panel cutout: 22mm. Insert from the front of the panel, secure with mounting nut from behind (tighten to 2-3 Nm).

Contact block: Snap or screw the contact block onto the rear of the button body. Ensure the contact block orientation matches the wiring diagram — NO terminals are usually marked.

Wiring: Use 0.5-2.5mm² stranded wire with ferrules. Tighten screw terminals to 0.8 Nm. Test the button function before energizing the circuit.

尺寸

故障排除

Button doesn't respond when pressed

Check the contact block first — it's the most common failure point. Test continuity across the NO or NC terminals with a multimeter. If no click is felt, the return spring in the head may be broken.

Works intermittently

Contact block contacts are pitted or burned. Replace the contact block — don't try to file the contacts. Check if the rated cycle count has been exceeded.

Button feels mushy or doesn't click

The spring return mechanism in the button head is worn. Replace the head. The contact block can usually be reused if it tests OK.

照片与图纸

图片:mouser.com

快速规格

Datasheet url
https://www.mouser.com/datasheet/3/222/1/1490.pdf
Device class
push-button
Enriched by
generic-fallback-2026-08-12
Lead time
23 Days
Mouser checked
2026-09-28