CannonKeys is proud to offer Gateron Pro Milky Brown 1.0 Tactile Switch! The Gateron Pro Milky Brown 1.0 Switch is the tactile version its cousin -- the Milky Yellow 1.0 Linears! It carries the same improved features such as a newer mold and some light factory lube. This makes for an enjoyable tactile stock switch with reduced stem wobble and great sound profile! Like the color and materials but want to customize the feel and sound? Check out our slow springs and Accessories for all your switch modding essentials. Available in quantities of 36. Switch Type Tactile Manufacturer Gateron Top Housing Material Proprietary milky Bottom Housing Material Proprietary milky Stem Material POM Spring Weight 50g actuation Mounting Pins 5-pin Factory Lube Light
研究笔记
1. What this is
Gateron Pro Milky Brown 1.0 Tactile Switch is a mechanical keyboard switch from Gateron. It is tactile.
2. Spec decode (from product name)
- Switch type: tactile
3. Compatibility & use
Standard MX-style keyboard switch. Choose by feel (linear/tactile/clicky), actuation force, and sound (silent vs standard); 5-pin PCB-mount switches also fit plate-mount boards. Hot-swap or solder depending on your board.
4. Data-quality note
The switch type is decoded from the name; the exact actuation force and mount should be confirmed against the manufacturer's spec. Flagged decoded-partial. (Note: some of these rows are catalogued under a generic push-button/arcade-button category in the source data; the correct device class is keyboard switch, recorded in the specs above.)
5. Sources
- Gateron product page / keyboard-switch community databases
- Distributor / vendor listing — search the exact switch name
来源
- Gateron Gateron Pro Milky Brown 1.0 Tactile Switch — keyboard-switch spec
规格参数
|
Device class
|
mechanical keyboard switch
|
|
Enriched by
|
keyboard-decoder-2026-08-12
|
|
Pn status
|
decoded-partial
|
|
Product type
|
Accessories
|
|
Series description
|
Gateron mechanical keyboard switch (tactile)
|
|
Shopify id
|
7093110669423
|
|
Switch type
|
tactile
|
|
Vendor
|
Stocked
|
安装快速参考
Panel cutout: 22mm. Insert from the front of the panel, secure with mounting nut from behind (tighten to 2-3 Nm).
Contact block: Snap or screw the contact block onto the rear of the button body. Ensure the contact block orientation matches the wiring diagram — NO terminals are usually marked.
Wiring: Use 0.5-2.5mm² stranded wire with ferrules. Tighten screw terminals to 0.8 Nm. Test the button function before energizing the circuit.
尺寸
故障排除
Button doesn't respond when pressed
Check the contact block first — it's the most common failure point. Test continuity across the NO or NC terminals with a multimeter. If no click is felt, the return spring in the head may be broken.
Works intermittently
Contact block contacts are pitted or burned. Replace the contact block — don't try to file the contacts. Check if the rated cycle count has been exceeded.
Button feels mushy or doesn't click
The spring return mechanism in the button head is worn. Replace the head. The contact block can usually be reused if it tests OK.
快速规格
- Device class
- mechanical keyboard switch
- Enriched by
- keyboard-decoder-2026-08-12
- Pn status
- decoded-partial
- Product type
- Accessories
- Series description
- Gateron mechanical keyboard switch (tactile)
