06TQ18

在产

Eaton Electrical 06TQ18

Eaton Electrical 06TQ18 — Eaton Electrical 06TQ18

Switch Fixings ILLUM PUSHBUTTON

研究笔记

1. What this is

06TQ18 is an Eaton device — series not recognized.

2. Part-number decode

  • Series: Eaton (series not recognized)

3. Compatibility & ordering

Eaton's M22 (RMQ-Titan, 22mm) and E30 / 10250T (30.5mm heavy-duty) are its principal command-switch ranges. This is a complete/integrated device. Match by size (22 / 30.5mm), function (pushbutton/selector/indicator/E-stop), color, illumination, and contact arrangement; cross-reference to Schneider Harmony, Allen-Bradley 800F/800T, Siemens 3SU, or IDEC HW by the same attributes if needed.

4. Data-quality note

The exact Eaton series/configuration could not be confidently decoded from this part number. Kept and documented; flagged needs-verification.

5. Sources

  • Eaton control-components catalog (Vol.7) / RMQ-Titan M22 & 10250T (eaton.com)
  • Distributor listing (Newark / Mouser) — search the exact part number

Verified distributor data (Mouser)

  • Official distributor description: Switch Legend Plates & Labels BTN PLATE 18X18 BLUE
  • Price (from): 3.61 EUR
  • Availability: Check Mouser for availability

This part is carried by Mouser Electronics; the description and datasheet above come straight from the distributor's catalog, confirming and expanding the part-number decode above.


来源
  1. Eaton — 06TQ18 — eaton.com

规格参数

Enriched by
eaton-decoder-2026-08-12
Lead time
0 Days
Manufacturer series
Eaton (series not recognized)
Mouser checked
2026-09-28
Mouser description
Switch Legend Plates & Labels BTN PLATE 18X18 BLUE
Mouser matched
true
Mouser part number
504-06TQ18
Pn status
verified
Series description
Eaton / Cutler-Hammer control component — exact series/config could not be decoded from this part number; kept and flagged for verification rather than guessed

安装快速参考

Panel cutout: 22mm. Insert from the front of the panel, secure with mounting nut from behind (tighten to 2-3 Nm).

Contact block: Snap or screw the contact block onto the rear of the button body. Ensure the contact block orientation matches the wiring diagram — NO terminals are usually marked.

Wiring: Use 0.5-2.5mm² stranded wire with ferrules. Tighten screw terminals to 0.8 Nm. Test the button function before energizing the circuit.

尺寸

故障排除

Button doesn't respond when pressed

Check the contact block first — it's the most common failure point. Test continuity across the NO or NC terminals with a multimeter. If no click is felt, the return spring in the head may be broken.

Works intermittently

Contact block contacts are pitted or burned. Replace the contact block — don't try to file the contacts. Check if the rated cycle count has been exceeded.

Button feels mushy or doesn't click

The spring return mechanism in the button head is worn. Replace the head. The contact block can usually be reused if it tests OK.

照片与图纸

图片:mouser.com

快速规格

Enriched by
eaton-decoder-2026-08-12
Lead time
0 Days
Manufacturer series
Eaton (series not recognized)
Mouser checked
2026-09-28
Mouser description
Switch Legend Plates & Labels BTN PLATE 18X18 BLUE