63.5g actuation force 2.00mm pre-travel 4.00mm total travel Proprietary POM-blend top and bottom housing Proprietary material stem Gold-plated spring
研究笔记
1. What this is
Durock Piano 63.5g Linear PCB Mount Switch is a mechanical keyboard switch from Durock. It is linear, 5-pin (PCB mount).
2. Spec decode (from product name)
- Switch type: linear
- Mount: 5-pin (PCB mount)
3. Compatibility & use
Standard MX-style keyboard switch. Choose by feel (linear/tactile/clicky), actuation force, and sound (silent vs standard); 5-pin PCB-mount switches also fit plate-mount boards. Hot-swap or solder depending on your board.
4. Data-quality note
The switch type, force, and/or mount are decoded from the product name (the standard way keyboard switches are specified). Confirm exact spring curve, travel, and housing/stem material against the manufacturer's spec if precision matters. (Note: some of these rows are catalogued under a generic push-button/arcade-button category in the source data; the correct device class is keyboard switch, recorded in the specs above.)
5. Sources
- Durock product page / keyboard-switch community databases
- Distributor / vendor listing — search the exact switch name
来源
- Durock Durock Piano 63.5g Linear PCB Mount Switch — keyboard-switch spec
规格参数
|
Device class
|
mechanical keyboard switch
|
|
Enriched by
|
keyboard-decoder-2026-08-12
|
|
Mount
|
5-pin (PCB mount)
|
|
Pn status
|
decoded
|
|
Product type
|
Keyboard Switches
|
|
Series description
|
Durock mechanical keyboard switch (linear)
|
|
Shopify id
|
9051734442284
|
|
Switch type
|
linear
|
|
Vendor
|
Durock
|
安装快速参考
Panel cutout: 22mm. Insert from the front of the panel, secure with mounting nut from behind (tighten to 2-3 Nm).
Contact block: Snap or screw the contact block onto the rear of the button body. Ensure the contact block orientation matches the wiring diagram — NO terminals are usually marked.
Wiring: Use 0.5-2.5mm² stranded wire with ferrules. Tighten screw terminals to 0.8 Nm. Test the button function before energizing the circuit.
尺寸
故障排除
Button doesn't respond when pressed
Check the contact block first — it's the most common failure point. Test continuity across the NO or NC terminals with a multimeter. If no click is felt, the return spring in the head may be broken.
Works intermittently
Contact block contacts are pitted or burned. Replace the contact block — don't try to file the contacts. Check if the rated cycle count has been exceeded.
Button feels mushy or doesn't click
The spring return mechanism in the button head is worn. Replace the head. The contact block can usually be reused if it tests OK.
快速规格
- Device class
- mechanical keyboard switch
- Enriched by
- keyboard-decoder-2026-08-12
- Mount
- 5-pin (PCB mount)
- Pn status
- decoded
- Product type
- Keyboard Switches
