KSC441G ST2 LFS

在产

C&K KSC441G ST2 LFS

C&K KSC441G ST2 LFS — C&K KSC441G ST2 LFS

系列图片:卖家将其用于12个其他部件,因此可能不显示此确切版本。

Tactile Switches 30Db 340Gf Gullwing

研究笔记

1. What this is

KSC441G ST2 LFS is a C&K tactile switch (K-series: KSC/KSA/KSR/KSL/KST/KSI/KMR/KMT/KXT etc., plus ITS/SSF — high-reliability PCB tact switch, many with sealed IP-rated and low-profile options).

2. Part-number decode

  • Product line: C&K K-series tactile
  • Type: tactile switch

3. Compatibility & ordering

C&K makes high-reliability electronic switches for PCB and panel mounting. Match by type (tactile / pushbutton / toggle / rotary), actuation (momentary vs latching), mounting (SMT / thru-hole / panel), and the electrical rating, then use the C&K datasheet to confirm the exact actuator height, force, and termination encoded in the part number.

4. Data-quality note

The C&K product line and switch type are decoded from the part number (grounded in C&K's series datasheets and DigiKey/Mouser listings). The exact actuator height, actuation force, contact rating, and termination are encoded in the full order code and depend on the specific line — confirm against the C&K datasheet for a precise order.

5. Sources

  • C&K Switches series datasheet (ckswitches.com)
  • Distributor listing (DigiKey / Mouser) — search the exact part number

来源
  1. C&K Switches — KSC441G ST2 LFS — ckswitches.com

规格参数

Device class
tactile switch
Enriched by
ck-decoder-2026-08-12
Lead time
105 Days
Manufacturer series
K-series tactile
Mouser part number
611-KSC441GST2LFS
Pn status
decoded
Rohs status
Series description
C&K tactile switch (K-series: KSC/KSA/KSR/KSL/KST/KSI/KMR/KMT/KXT etc., plus ITS/SSF — high-reliability PCB tact switch, many with sealed IP-rated and low-profile options)

安装快速参考

Panel cutout: 22mm. Insert from the front of the panel, secure with mounting nut from behind (tighten to 2-3 Nm).

Contact block: Snap or screw the contact block onto the rear of the button body. Ensure the contact block orientation matches the wiring diagram — NO terminals are usually marked.

Wiring: Use 0.5-2.5mm² stranded wire with ferrules. Tighten screw terminals to 0.8 Nm. Test the button function before energizing the circuit.

尺寸

故障排除

Button doesn't respond when pressed

Check the contact block first — it's the most common failure point. Test continuity across the NO or NC terminals with a multimeter. If no click is felt, the return spring in the head may be broken.

Works intermittently

Contact block contacts are pitted or burned. Replace the contact block — don't try to file the contacts. Check if the rated cycle count has been exceeded.

Button feels mushy or doesn't click

The spring return mechanism in the button head is worn. Replace the head. The contact block can usually be reused if it tests OK.

照片与图纸

图片:mouser.com

快速规格

Device class
tactile switch
Enriched by
ck-decoder-2026-08-12
Lead time
105 Days
Manufacturer series
K-series tactile
Mouser part number
611-KSC441GST2LFS