ELUMEESAQ7C12

在产

C&K ELUMEESAQ7C12

C&K ELUMEESAQ7C12 — C&K ELUMEESAQ7C12

系列图片:卖家将其用于27个其他部件,因此可能不显示此确切版本。

Pushbutton Switches RA SMT BLUE LED

研究笔记

1. What this is

ELUMEESAQ7C12 is a C&K ELUM-series illuminated pushbutton — right-angle, SMT or thru-hole, central LED illumination; Latching push-push (EE).

2. Part-number decode

  • Product line: C&K ELUM
  • Type: illuminated pushbutton

3. Compatibility & ordering

C&K makes high-reliability electronic switches for PCB and panel mounting. Match by type (tactile / pushbutton / toggle / rotary), actuation (momentary vs latching), mounting (SMT / thru-hole / panel), and the electrical rating, then use the C&K datasheet to confirm the exact actuator height, force, and termination encoded in the part number.

4. Data-quality note

The C&K product line and switch type are decoded from the part number (grounded in C&K's series datasheets and DigiKey/Mouser listings). The exact actuator height, actuation force, contact rating, and termination are encoded in the full order code and depend on the specific line — confirm against the C&K datasheet for a precise order.

5. Sources

  • C&K Switches series datasheet (ckswitches.com)
  • Distributor listing (DigiKey / Mouser) — search the exact part number

来源
  1. C&K Switches — ELUMEESAQ7C12 — ckswitches.com

规格参数

Device class
illuminated pushbutton
Enriched by
ck-decoder-2026-08-12
Lead time
0 Days
Manufacturer series
ELUM
Mouser part number
611-ELUMEESAQ7C12
Pn status
decoded
Rohs status
RoHS Compliant
Series description
C&K ELUM-series illuminated pushbutton — right-angle, SMT or thru-hole, central LED illumination; Latching push-push (EE)

安装快速参考

Panel cutout: 22mm. Insert from the front of the panel, secure with mounting nut from behind (tighten to 2-3 Nm).

Contact block: Snap or screw the contact block onto the rear of the button body. Ensure the contact block orientation matches the wiring diagram — NO terminals are usually marked.

Wiring: Use 0.5-2.5mm² stranded wire with ferrules. Tighten screw terminals to 0.8 Nm. Test the button function before energizing the circuit.

尺寸

故障排除

Button doesn't respond when pressed

Check the contact block first — it's the most common failure point. Test continuity across the NO or NC terminals with a multimeter. If no click is felt, the return spring in the head may be broken.

Works intermittently

Contact block contacts are pitted or burned. Replace the contact block — don't try to file the contacts. Check if the rated cycle count has been exceeded.

Button feels mushy or doesn't click

The spring return mechanism in the button head is worn. Replace the head. The contact block can usually be reused if it tests OK.

照片与图纸

图片:mouser.com

快速规格

Device class
illuminated pushbutton
Enriched by
ck-decoder-2026-08-12
Lead time
0 Days
Manufacturer series
ELUM
Mouser part number
611-ELUMEESAQ7C12