Blue Sea Systems · WeatherDeck 系列

8296

在产
UL ABYC E-11 CE

WeatherDeck Toggle Switch DPDT

Blue Sea Systems WeatherDeck 系列 Introduced circa 2010

Blue Sea WeatherDeck DPDT toggle switch with boot.

常见应用

Waterproof toggle for deck-mounted applications — anchor lights, spreader lights, horn. The silicone boot seals against wave splash and rain. DPDT allows on/off/on for dual-function circuits (running lights / anchor light).

规格参数

Actuator Function
Maintained
Certifications
UL, ABYC E-11, CE
Contact Configuration
DPDT ON-OFF-ON
IP Rating
IP66
Material
Glass-filled nylon

安装快速参考

Panel cutout: 22mm. Insert from the front of the panel, secure with mounting nut from behind (tighten to 2-3 Nm).

Contact block: Snap or screw the contact block onto the rear of the button body. Ensure the contact block orientation matches the wiring diagram — NO terminals are usually marked.

Wiring: Use 0.5-2.5mm² stranded wire with ferrules. Tighten screw terminals to 0.8 Nm. Test the button function before energizing the circuit.

尺寸

接线图

故障排除

Button doesn't respond when pressed

Check the contact block first — it's the most common failure point. Test continuity across the NO or NC terminals with a multimeter. If no click is felt, the return spring in the head may be broken.

Works intermittently

Contact block contacts are pitted or burned. Replace the contact block — don't try to file the contacts. Check if the rated cycle count has been exceeded.

Button feels mushy or doesn't click

The spring return mechanism in the button head is worn. Replace the head. The contact block can usually be reused if it tests OK.

快速规格

Actuator Function
Maintained
Certifications
UL, ABYC E-11, CE
Contact Configuration
DPDT ON-OFF-ON
IP Rating
IP66
Material
Glass-filled nylon

用户评价

+

“Waterproof toggle for deck-mounted applications — anchor lights, spreader lights, horn. The silicone boot seals against wave splash and rain. DPDT allows on/off/on for dual-functio”

Reddit r/boating 11 点赞 查看讨论 →