Blue Sea Systems · 8200 系列

8200

在产
UL ABYC E-11 CE

Marine Push Button Switch SPST

Blue Sea Systems 8200 系列 Introduced circa 2008

Blue Sea Systems marine-grade push button, sealed for marine environments.

常见应用

Purpose-built for boats. Neoprene boot seals against salt spray and wave splash. Found on helm panels and engine rooms. Ignition-protected per ABYC E-11 for gasoline boats.

规格参数

Actuator Function
Momentary
Certifications
UL, ABYC E-11, CE
Color
Red
Contact Configuration
SPST
IP Rating
IP66
Material
Nylon with neoprene boot

安装快速参考

Panel cutout: 22mm. Insert from the front of the panel, secure with mounting nut from behind (tighten to 2-3 Nm).

Contact block: Snap or screw the contact block onto the rear of the button body. Ensure the contact block orientation matches the wiring diagram — NO terminals are usually marked.

Wiring: Use 0.5-2.5mm² stranded wire with ferrules. Tighten screw terminals to 0.8 Nm. Test the button function before energizing the circuit.

尺寸

接线图

故障排除

Button doesn't respond when pressed

Check the contact block first — it's the most common failure point. Test continuity across the NO or NC terminals with a multimeter. If no click is felt, the return spring in the head may be broken.

Works intermittently

Contact block contacts are pitted or burned. Replace the contact block — don't try to file the contacts. Check if the rated cycle count has been exceeded.

Button feels mushy or doesn't click

The spring return mechanism in the button head is worn. Replace the head. The contact block can usually be reused if it tests OK.

快速规格

Actuator Function
Momentary
Certifications
UL, ABYC E-11, CE
Color
Red
Contact Configuration
SPST
IP Rating
IP66

用户评价

+

“Blue Sea is the gold standard for marine electrical. The 8200 push button with neoprene boot has survived 5 years of saltwater fishing. Nothing else comes close for the marine environment.”

Reddit r/boating by offshore_captain 19 点赞 查看讨论 →