Pushbutton Switches SWITCH PB MINI SNAP-ACT
Research Notes
1. What this is
18835AD+U912+U1202 is an APEM APEM component — line not recognized.
2. Part-number decode
- Series: APEM APEM (line not recognized)
- Type: switch
3. Compatibility & ordering
APEM makes pushbuttons (incl. anti-vandal and illuminated), tactile switches, toggle switches, joysticks, and indicators for industrial and electronic equipment. Match by type, actuation, illumination, sealing (IP rating), and mounting, then use the APEM datasheet to confirm the exact contact and actuator configuration encoded in the part number.
4. Data-quality note
The exact APEM product line/configuration could not be confidently decoded from this part number. Kept and documented; flagged needs-verification.
5. Sources
- APEM product catalog (apem.com)
- Distributor listing (RS / Mouser / DigiKey) — search the exact part number
1 source
- APEM — 18835AD+U912+U1202 — apem.com
规格参数
|
Enriched by
|
apem-decoder-2026-08-12
|
|
Lead time
|
70 Days
|
|
Manufacturer series
|
APEM (line not recognized)
|
|
Mouser part number
|
642-18835ADU912U1202
|
|
Pn status
|
needs-verification
|
|
Rohs status
|
RoHS Compliant
|
|
Series description
|
APEM switch component — exact product line/config could not be decoded from this part number; kept and flagged for verification rather than guessed
|
安装快速参考
Panel cutout: 22mm. Insert from the front of the panel, secure with mounting nut from behind (tighten to 2-3 Nm).
Contact block: Snap or screw the contact block onto the rear of the button body. Ensure the contact block orientation matches the wiring diagram — NO terminals are usually marked.
Wiring: Use 0.5-2.5mm² stranded wire with ferrules. Tighten screw terminals to 0.8 Nm. Test the button function before energizing the circuit.
尺寸
故障排除
Button doesn't respond when pressed
Check the contact block first — it's the most common failure point. Test continuity across the NO or NC terminals with a multimeter. If no click is felt, the return spring in the head may be broken.
Works intermittently
Contact block contacts are pitted or burned. Replace the contact block — don't try to file the contacts. Check if the rated cycle count has been exceeded.
Button feels mushy or doesn't click
The spring return mechanism in the button head is worn. Replace the head. The contact block can usually be reused if it tests OK.
快速规格
- Enriched by
- apem-decoder-2026-08-12
- Lead time
- 70 Days
- Manufacturer series
- APEM (line not recognized)
- Mouser part number
- 642-18835ADU912U1202
- Pn status
- needs-verification
