Switch Actuators 22mm BLK Non-Illum Booted Momentary
规格参数
|
Device class
|
pushbutton
|
|
Enriched by
|
altech-decoder-2026-08-12
|
|
Lead time
|
28 Days
|
|
Manufacturer series
|
2AB
|
|
Mouser part number
|
845-2AB2
|
|
Pn status
|
decoded-partial
|
|
Rohs status
|
RoHS Compliant
|
|
Series description
|
Altech 2AB-series 22mm pushbutton operator
|
安装快速参考
Panel cutout: 22mm. Insert from the front of the panel, secure with mounting nut from behind (tighten to 2-3 Nm).
Contact block: Snap or screw the contact block onto the rear of the button body. Ensure the contact block orientation matches the wiring diagram — NO terminals are usually marked.
Wiring: Use 0.5-2.5mm² stranded wire with ferrules. Tighten screw terminals to 0.8 Nm. Test the button function before energizing the circuit.
尺寸
故障排除
Button doesn't respond when pressed
Check the contact block first — it's the most common failure point. Test continuity across the NO or NC terminals with a multimeter. If no click is felt, the return spring in the head may be broken.
Works intermittently
Contact block contacts are pitted or burned. Replace the contact block — don't try to file the contacts. Check if the rated cycle count has been exceeded.
Button feels mushy or doesn't click
The spring return mechanism in the button head is worn. Replace the head. The contact block can usually be reused if it tests OK.
快速规格
- Device class
- pushbutton
- Enriched by
- altech-decoder-2026-08-12
- Lead time
- 28 Days
- Manufacturer series
- 2AB
- Mouser part number
- 845-2AB2
