ABB · MP 系列

MP1-10Y

在产
UL CSA CE

22mm Yellow Flush Push Button 1NO

零件编号: MP - 1
ABB MP 系列 Introduced circa 2005

ABB modular yellow push button.

常见应用

Yellow for caution/intervention on ABB panels. Completes the ABB color range alongside green, red, and blue.

规格参数

Actuator Type
Flush
Certifications
UL, CSA, CE
Color
Yellow
Contact Configuration
1NO
Cutout Diameter
22mm

安装快速参考

Panel cutout: 22mm. Insert from the front of the panel, secure with mounting nut from behind (tighten to 2-3 Nm).

Contact block: Snap or screw the contact block onto the rear of the button body. Ensure the contact block orientation matches the wiring diagram — NO terminals are usually marked.

Wiring: Use 0.5-2.5mm² stranded wire with ferrules. Tighten screw terminals to 0.8 Nm. Test the button function before energizing the circuit.

尺寸

Front 22mm cutout panel hole diameter Side panel contact ~45mm depth

接线图

L T 11 12 NO (open) press ↓

故障排除

Button doesn't respond when pressed

Check the contact block first — it's the most common failure point. Test continuity across the NO or NC terminals with a multimeter. If no click is felt, the return spring in the head may be broken.

Works intermittently

Contact block contacts are pitted or burned. Replace the contact block — don't try to file the contacts. Check if the rated cycle count has been exceeded.

Button feels mushy or doesn't click

The spring return mechanism in the button head is worn. Replace the head. The contact block can usually be reused if it tests OK.

快速规格

Actuator Type
Flush
Certifications
UL, CSA, CE
Color
Yellow
Contact Configuration
1NO
Cutout Diameter
22mm

用户评价

+

“Yellow for caution/intervention on ABB panels. Completes the ABB color range alongside green, red, and blue.”

Reddit r/PLC 15 点赞 查看讨论 →