Typeplus Peacock Switches are linear switches from a Typeplus, a new switch manufacturer focused on meticulous quality inspection for every switch component. Featuring a classic Nylon housing blend with a POM stem to showcase their attention to detail, from tighter tolerances, reduced stem wobble, and a consistent keypress. Sound Profile: Neutral, Mild, Full, Slight Scratch Typeplus Peacock Switches Feature: 18 included in each pack Linear Top Housing: PA66 Nylon Bottom Housing: PA66 Nylon Stem: POM Spring: 18mm, Single-stage Pre-travel: 2.0mm Total Travel: 4.0mm (Rail Bottom-out) Actuation: 38g Bottom-out: 51g 5-Pin, PCB Mount Lubed or Unlubed Price: $0.45 per switch About Typeplus Switches: Typeplus uses a "combinational manufacturing" approach by utilizing specialized manufacturers for individual components before final assembly and quality check at the Typeplus facility. By optimizing each part separately, Typeplus is able to utilize the best components from different factories to create their ideal switch. Includes: 18 Typeplus Peacock Switches
Ghi chú Nghiên cứu
1. What this is
Typeplus Peacock Linear Switches is a mechanical keyboard switch from Typeplus. It is linear.
2. Spec decode (from product name)
- Switch type: linear
3. Compatibility & use
Standard MX-style keyboard switch. Choose by feel (linear/tactile/clicky), actuation force, and sound (silent vs standard); 5-pin PCB-mount switches also fit plate-mount boards. Hot-swap or solder depending on your board.
4. Data-quality note
The switch type is decoded from the name; the exact actuation force and mount should be confirmed against the manufacturer's spec. Flagged decoded-partial. (Note: some of these rows are catalogued under a generic push-button/arcade-button category in the source data; the correct device class is keyboard switch, recorded in the specs above.)
5. Sources
- Typeplus product page / keyboard-switch community databases
- Distributor / vendor listing — search the exact switch name
Nguồn
- Typeplus Typeplus Peacock Linear Switches — keyboard-switch spec
Thông số kỹ thuật
|
Device class
|
mechanical keyboard switch
|
|
Enriched by
|
keyboard-decoder-2026-08-12
|
|
Pn status
|
decoded-partial
|
|
Product type
|
Switches
|
|
Series description
|
Typeplus mechanical keyboard switch (linear)
|
|
Shopify id
|
7820494536769
|
|
Switch type
|
linear
|
|
Vendor
|
Typeplus
|
Hướng Dẫn Cài Đặt Nhanh
Panel cutout: 22mm. Insert from the front of the panel, secure with mounting nut from behind (tighten to 2-3 Nm).
Contact block: Snap or screw the contact block onto the rear of the button body. Ensure the contact block orientation matches the wiring diagram — NO terminals are usually marked.
Wiring: Use 0.5-2.5mm² stranded wire with ferrules. Tighten screw terminals to 0.8 Nm. Test the button function before energizing the circuit.
Kích thước
Khắc phục sự cố
Button doesn't respond when pressed
Check the contact block first — it's the most common failure point. Test continuity across the NO or NC terminals with a multimeter. If no click is felt, the return spring in the head may be broken.
Works intermittently
Contact block contacts are pitted or burned. Replace the contact block — don't try to file the contacts. Check if the rated cycle count has been exceeded.
Button feels mushy or doesn't click
The spring return mechanism in the button head is worn. Replace the head. The contact block can usually be reused if it tests OK.
Thông số kỹ thuật nhanh
- Device class
- mechanical keyboard switch
- Enriched by
- keyboard-decoder-2026-08-12
- Pn status
- decoded-partial
- Product type
- Switches
- Series description
- Typeplus mechanical keyboard switch (linear)