1825027-1
Hoạt độngFSM 6x6mm Right-Angle Tactile Switch SPST-NO
TE Connectivity 19mm anti-vandal push button in stainless steel.
Ứng Dụng Phổ Biến
TE Connectivity brings their connector engineering expertise to anti-vandal switches. 316L stainless, IP67 sealed, ring LED illumination. Found on EV charging stations, parking meters, and industrial kiosks. TEs global distribution network means instant availability everywhere.
Thông số kỹ thuật
|
Actuation Force
The force needed to press the button. Lower = more sensitive. Sanwa ~65g (light), Seimitsu ~85g (medium), Happ ~130g (heavy).
|
160 gf (1.57 N)
|
|
Actuator Function
Momentary = springs back when released. Maintained/latching = stays pressed until pressed again.
|
Momentary
|
|
Actuator material
|
Black PBT
|
|
Contact Configuration
Normally Open — circuit is off until you press. Standard for start/go/enable functions.
|
SPST-NO
|
|
Life cycles
|
100,000
|
|
Mount
|
Through-hole, right-angle (side-actuated)
|
|
Operating temp
|
-20C to +105C
|
|
Rating
|
50 mA @ 24 VDC
|
|
Series
The manufacturer's product family. Products in the same series share mounting systems and accessories.
|
TE ALCOSWITCH FSM 6x6
|
|
Travel
|
0.25 mm
|
Hướng Dẫn Cài Đặt Nhanh
Panel cutout: 22mm. Insert from the front of the panel, secure with mounting nut from behind (tighten to 2-3 Nm).
Contact block: Snap or screw the contact block onto the rear of the button body. Ensure the contact block orientation matches the wiring diagram — NO terminals are usually marked.
Wiring: Use 0.5-2.5mm² stranded wire with ferrules. Tighten screw terminals to 0.8 Nm. Test the button function before energizing the circuit.
Kích thước
Sơ đồ đấu dây
Khắc phục sự cố
Button doesn't respond when pressed
Check the contact block first — it's the most common failure point. Test continuity across the NO or NC terminals with a multimeter. If no click is felt, the return spring in the head may be broken.
Works intermittently
Contact block contacts are pitted or burned. Replace the contact block — don't try to file the contacts. Check if the rated cycle count has been exceeded.
Button feels mushy or doesn't click
The spring return mechanism in the button head is worn. Replace the head. The contact block can usually be reused if it tests OK.
Nơi Mua Hàng
Dải giá
$0.31 — $85.22
từ 3 nhà phân phối
Thông số kỹ thuật nhanh
- Actuation Force
- 160 gf (1.57 N)
- Actuator Function
- Momentary
- Actuator material
- Black PBT
- Contact Configuration
- SPST-NO
- Life cycles
- 100,000
Những Đánh Giá Từ Khách Hàng
“TE Connectivity brings their connector engineering expertise to anti-vandal switches. 316L stainless, IP67 sealed, ring LED illumination. Found on EV charging stations, parking meters, and industrial ”
