Sanwa Arcade Service Push Button, model SDM-18. This pushbutton has a diameter of 18mm and comes in two colours: red and white.
Thông số kỹ thuật
|
Arcade express id
|
940
|
|
Weight kg
|
0.050000
|
Hướng Dẫn Cài Đặt Nhanh
Mounting: Snap-in buttons push into a 30mm hole from the top of the panel. Screw-in buttons thread from below and secure with a nut. Use 2-3mm acrylic, wood, or metal panel.
Wiring: Connect the microswitch terminals to your encoder or PCB. Common ground shared across all buttons. Quick-disconnect (0.110") terminals are standard on Japanese buttons.
Kích thước
Khắc phục sự cố
Not responding to input
Check wiring continuity with a multimeter. Verify the contact block is properly seated. Inspect terminals for loose connections.
Thông số kỹ thuật nhanh
- Arcade express id
- 940
- Weight kg
- 0.050000
