BP-STANDARD
Hoạt độngBP Standard Elevator Button (LED, Surface Mount)
Standard surface-mount LED-illuminated elevator push button from MAD Elevator. Durable stainless steel construction with tactile feedback and Braille markings. Cost-effective option for mid-rise residential and commercial buildings.
Ứng Dụng Phổ Biến
A cost-effective alternative to the BP Premium for applications where extreme vandal resistance is not required. Surface-mount design simplifies installation in modernization projects. Suitable for mid-rise residential buildings and office towers.
Thông số kỹ thuật
|
ADA Compliant
Meets Americans with Disabilities Act requirements for accessible design.
|
yes (ASME A17.1, ADA)
|
|
Braille Compatible
Whether the button has Braille markings for visually impaired users. Required by ADA in the US.
|
yes
|
|
Certifications
Third-party safety certifications. UL = required for US NEC installations. CE = EU compliance. CSA = Canadian standards.
|
CSA, UL, ASME A17.1
|
|
Illumination
Whether the button has a built-in light. Illuminated buttons show status (lit = active).
|
LED backlight, white
|
|
IP Rating
Ingress Protection rating — first digit is dust (0-6), second is water (0-9). Higher is better.
|
IP54
|
|
LED Voltage
The voltage required for the built-in LED. Must match your control circuit voltage (typically 24V DC or 230V AC).
|
12-30V DC
|
|
Material
The bezel/body material. Metal bezels are more durable in harsh environments. Plastic is lighter and cheaper.
|
304 stainless steel faceplate
|
|
Mechanical Life
How many press cycles before mechanical failure. Higher is better — 10M cycles at 100 presses/day = 274 years.
|
1,500,000 cycles
|
|
Mounting Type
How the button attaches to the panel. Panel mount is standard — installs through a cutout from the front.
|
surface
|
|
Max Operating Temp
Highest temperature the button is rated to operate in.
|
55°C
|
|
Min Operating Temp
Lowest temperature the button is rated to operate in.
|
-10°C
|
|
Vandal Rating (IK)
IK rating for impact resistance. IK09 = 10 joules (hammer blow). IK10 = 20 joules (serious vandalism). Higher is tougher.
|
IK07 (2J impact)
|
Thông số kỹ thuật có biểu tượng này được liên kết đến trang nguồn gốc của nhà sản xuất
Hướng Dẫn Cài Đặt Nhanh
Installation: Professional elevator technician required. Must comply with local elevator codes (ASME A17.1 / EN 81). Braille plates must be positioned per ADA requirements (48" max height for side reach).
Kích thước
Khắc phục sự cố
Not responding to input
Check wiring continuity with a multimeter. Verify the contact block is properly seated. Inspect terminals for loose connections.
Nơi Mua Hàng
Thông số kỹ thuật nhanh
- ADA Compliant
- yes (ASME A17.1, ADA)
- Braille Compatible
- yes
- Certifications
- CSA, UL, ASME A17.1
- Illumination
- LED backlight, white
- IP Rating
- IP54
Những Đánh Giá Từ Khách Hàng
“MAD Elevator BP-STANDARD is spec-compliant and holds up in real buildings. ADA and local code compliance is the priority — aesthetics are secondary.”
Tìm Hiểu Thêm
Nguồn Dữ Liệu
Thông số kỹ thuật và dữ liệu sản phẩm được trích dẫn từ các tài liệu tham khảo sau.