BP-PREMIUM
Hoạt độngBP Premium Vandal-Resistant Elevator Button (Braille)
Premium vandal-resistant illuminated elevator push button with Braille markings from MAD Elevator. Stainless steel faceplate with capacitive or mechanical activation, halo LED illumination, and full ADA/ASME A17.1 compliance.
Ứng Dụng Phổ Biến
Designed for elevator car operating panels (COP) and hall stations in high-traffic or vandal-prone environments such as public housing, parking garages, and transit stations. Flush-mounted stainless steel construction resists damage while maintaining an attractive appearance. Braille and raised tactile characters meet accessibility requirements.
Thông số kỹ thuật
|
ADA Compliant
Meets Americans with Disabilities Act requirements for accessible design.
|
yes (ASME A17.1, ADA)
|
|
Braille Compatible
Whether the button has Braille markings for visually impaired users. Required by ADA in the US.
|
yes
|
|
Certifications
Third-party safety certifications. UL = required for US NEC installations. CE = EU compliance. CSA = Canadian standards.
|
CSA, UL, CE, ASME A17.1
|
|
Illumination
Whether the button has a built-in light. Illuminated buttons show status (lit = active).
|
Halo LED, white or amber
|
|
IP Rating
IP65: Dust-tight and protected against low-pressure water jets. Suitable for indoor industrial and light washdown.
|
IP65
|
|
LED Voltage
The voltage required for the built-in LED. Must match your control circuit voltage (typically 24V DC or 230V AC).
|
12-30V DC
|
|
Material
The bezel/body material. Metal bezels are more durable in harsh environments. Plastic is lighter and cheaper.
|
316 stainless steel faceplate
|
|
Mechanical Life
How many press cycles before mechanical failure. Higher is better — 10M cycles at 100 presses/day = 274 years.
|
2,000,000 cycles
|
|
Mounting Type
How the button attaches to the panel. Panel mount is standard — installs through a cutout from the front.
|
flush
|
|
Max Operating Temp
Highest temperature the button is rated to operate in.
|
60°C
|
|
Min Operating Temp
Lowest temperature the button is rated to operate in.
|
-20°C
|
|
Vandal Rating (IK)
IK rating for impact resistance. IK09 = 10 joules (hammer blow). IK10 = 20 joules (serious vandalism). Higher is tougher.
|
IK10 (20J impact)
|
Thông số kỹ thuật có biểu tượng này được liên kết đến trang nguồn gốc của nhà sản xuất
Hướng Dẫn Cài Đặt Nhanh
Installation: Professional elevator technician required. Must comply with local elevator codes (ASME A17.1 / EN 81). Braille plates must be positioned per ADA requirements (48" max height for side reach).
Kích thước
Khắc phục sự cố
Not responding to input
Check wiring continuity with a multimeter. Verify the contact block is properly seated. Inspect terminals for loose connections.
Nơi Mua Hàng
Thông số kỹ thuật nhanh
- ADA Compliant
- yes (ASME A17.1, ADA)
- Braille Compatible
- yes
- Certifications
- CSA, UL, CE, ASME A17.1
- Illumination
- Halo LED, white or amber
- IP Rating
- IP65
Những Đánh Giá Từ Khách Hàng
“KONE KDS300 is what we install in most high-traffic buildings. LED feedback, Braille compatible, stainless face. For really rough environments (parking garages, public housing), go with MAD Elevator BP-Premium — virtually indestructible.”
Tìm Hiểu Thêm
Nguồn Dữ Liệu
Thông số kỹ thuật và dữ liệu sản phẩm được trích dẫn từ các tài liệu tham khảo sau.
BP-PREMIUM Page
https://www.store.madelevator.com/bp-premium-vandal-pushbutton/pushbuttons/store.html
Truy cập ngày April 04, 2026